Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charles B - July 1, 2020
Verified Purchase
Wasn’t correct
Part said it had a check valve but it didn’t.Threw the hose and kenmore dishwasher in the dump. And bought a Maytag and solved my problem
★★★★★
★★★★★
Isaac N - September 6, 2019
Verified Purchase
Fast, easy
Right part as described, very pleased
★★★★★
★★★★★
Dave M - January 16, 2019
Verified Purchase
Worked great
The parts was exactly right
★★★★★
★★★★★
Enrique S - September 12, 2018
Verified Purchase
Exact fit
Good quality part
★★★★★
★★★★★
Robert H - April 18, 2018
Verified Purchase
STOP THE LEAK
THERE IS NOT A LOT OF ROOM UNDER A DISHWASHER TO WORK WITH. YET THE DISCONNECT WAS QUITE EASY, THE HOLE THROUGH THE WALL NEEDED A LITTLE ENLARGING FOR EASY INSTALLING OF THE NEW HOSE. THE STRING I HAD PLUGGED INTO THE OLD HOSE WORKED AS A PULL BACK ON THE NEW HOSE, A LITTLE DISH SOAP AND THE HOSE CAME THROUGH THE WALL. CLAMPS TIGHTENED AND NO LEAKS . 4 CYCLES OF WASHING DISHES AND CELEBRATE . PERFECT THANK YOU .
★★★★★
★★★★★
Alfred V - April 15, 2018
Verified Purchase
works fine
Dishwasher is back in service. The part is expensive for what you get.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Original drain hose developed a leak
The repair went well with the major problem being I replaced the drain hose without removing the dishwasher from it's position. Due to this I removed the drain end with out being able to see the hose and put it back on by feel. Over all I was back up and running with in 30 minutes and everything has worked very well so far.
Howard from Sayre, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cracked drain hose
removed two hose clamps and old hose. slid new hose on existing fittings on dishwasher drain and disposal and tightened hose clamps. Turned it on for test run.
Larry from Magnolia, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
7 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken hose
Removed dishwasher lower faceplate. Removed hose clamp at the dishwasher end. Removed clamp at the garbage-disposal end. Removed hose. Pulled new hose. Connected both ends of the hose. Installed both clamps. Tested.
carlos from potomac, MD
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
24 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nate
February 20, 2018
What size is the drain line?
For model number WDF520PADB
Hi Nate,
Thank you for your question. This hose is approximately 7 feet long. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.