This is a burner surface element and is 8 inches in diameter and 2600 watts. The burner surface element functions as a cooking area on the cooktop of the range. The purpose of this part is to supply heat to the cooking area. This is a 5 turn coiled surafce element that features looped terminal ends. The element is sold individually. Before installing, make sure to unplug the cooktop and to allow enough time for your current element to cool down. The most common reason for needing a new element is if your current one will not heat.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jim H - July 11, 2018
Verified Purchase
Burner
Arrived damaged. Still using old one.
July 27, 2018
Thank you for leaving a review on the. Sorry it had taken us so long to get back to you. We have been a bit more popular than normal and are now able to check our reviews. I have sent you an email in regard to the order. Hope to hear from you!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replaced power burner, burner trays, and electrical socket for power burner
Repair went fine, part replacement was identical. Everything is in working order again. My cooktop is 26 years old.
The new element has a manufacturing defect. This problem was immediately rectified by their salesperson Mary. Another burner element is on its way thanks to the professional and personal help from Mary.
ron from WALNUT CREEK, CA
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ted
February 7, 2018
No matter the knob setting, my large right front 8" burner sometimes just jumps to high (red hot) and burns food before I know it. I then turn it off and back on low and it then works for a while without again overheating. Is the burner bad, or the switch. They don't make the switch anymore.
For model number KECG260SBC7
Hi Ted, Thank you for the question. Unfortunately this would be an issue with the switch. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
