See part 16 in the diagram
( Grid squares measure 1x1 inch )
Water Dispenser Reservoir Tubing
$77.88
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS11739924
Manufacturer Part Number WP2256126
Manufactured by
Whirlpool
Product Description
Water Dispenser Reservoir Tubing Specifications
This kit no longer includes the connectors. It is only the tubing/water reservoir.
Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mikel
September 16, 2017
Does this include the reservoir or just the tubing?
For model number RS25AWXEW01
Hi Mikel,
Thank you for your inquiry. This tubing is actually your reservoir now. The manufacturer has replaced your reservoir with this tubing as they stopped making the actual tank. Good luck with your repair.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Bernie
October 17, 2017
How is tubing installed?
For model number ED5FHEXSS02
Hi Bernie, Thank you for the question. You will need to connect each end of the tubing to where the old reservoir tank would have connected to. The tubing then just sits at the back of the appliance where the tank sat.Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Victor
December 6, 2018
The chilled water tank was contaminated (dirty water supply). Is there any trick to removing the lines to and from the tank, so I can remove the tank to clean it. Thanks
For model number ED25PWXBN00
Hello Victor, Thank you for the question. The tubing just pulls out of the connectors. Hope this helps, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Keith
December 4, 2019
The fridge is not making ice and no water out of the dispenser. I replaced the water inlet valve but nothing changed. I did find a tube that is broken. This tube is not connected to the water inlet valve. One end runs up into the back of the fridge, and the other end runs to the front of the fridge, where it connects to the coupling (blue port). The other side of the coupling has a red port and that tube runs up into the water dispenser. Which part do i need? Is it the reservoir tubing? Would this fix both problems?
For model number KSCS25FKSS01
Hello Keith and thanks for writing.
You could have a problem with the tubing, but it sounds more like a faulty icemaker control assembly PS2341896. Check with an ohmmeter and see if the assembly works. water tube kit PS11730901
Was this helpful?
Thank you for voting!
Related Parts:
Part Videos
Replacing your Whirlpool Refrigerator Water Dispenser Reservoir Tubing
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 2 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The old resevoir needed to be replaced
The repair was incredibly easy -
1. Turn off the water at the water line for the fridge
2. Disconnect the pressure fittings for both lines running to the resevoir.
3. Remove the old resevoir
4. Install the new resevoir and run the lines back to the orginal fittings.
5. Reconnect the fittings, turn on water.
6. Drink water!
1. Turn off the water at the water line for the fridge
2. Disconnect the pressure fittings for both lines running to the resevoir.
3. Remove the old resevoir
4. Install the new resevoir and run the lines back to the orginal fittings.
5. Reconnect the fittings, turn on water.
6. Drink water!
-
Fred from Martinsburg, WV -
Difficulty Level:Really Easy -
Total Repair Time:15 - 30 mins -
Tools:Pliers, Socket set -
Parts Used:WP2256126
32 of 64 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dispensed water w/ funny looking particles
First the small screws you sent did not fit.I had to cut and mend the old ones (2) to use them.I did purchase a connecting valve tha I used to connect the part of tubing (my name for it) from old one to new one.I was surprides it is working fine.Not bad for a nurse!
-
MARGARITA from TAMPA, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Wrench (Adjustable), Wrench set
-
Parts Used:WP2256126
10 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
James K - November 7, 2018
water dispenser reser.
the repair went well only took about 15 mins. cost me nothing in repair cost because I am a maintenance man with over 40 years of in this field
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739924
Manufacturer Part Number: WP2256126
Manufacturer Part Number: WP2256126
Brand
Model Number
Description