10650022001 Kenmore Refrigerator Parts & Repair Help | PartSelect
Models > 10650022001

10650022001 Kenmore Refrigerator - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(58)
PartSelect #:PS884734
Manufacturer #:8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...
$6.16
In Stock
(79)
PartSelect #:PS11739042
Manufacturer #:WP2182179
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side, or the freezer side. It helps hold the door open. This cam is made out of plasti...
$5.51
In Stock
(16)
PartSelect #:PS2341896
Manufacturer #:W10190935
The icemaker control assembly is located in the freezer section of your refrigerator. It is what controls the icemaker. The control turns the timing cams and the ejector blades. It...
$107.05
In Stock
(84)
PartSelect #:PS11739122
Manufacturer #:WP2188664
This clear convertible meat drawer can be used to store meats or vegetables. It has its own cold air duct to allow cold air from the freezer to flow into the drawer. You could have...
$54.81
On Order
(40)
PartSelect #:PS11752991
Manufacturer #:WPW10329686
The lower door cam is also known as the closing cam or door closer cam and can be found on your refrigerator or freezer door. The purpose of the lower door cam is to lift the door ...
$5.51
In Stock
(97)
PartSelect #:PS11739027
Manufacturer #:WP2180226
This is a control bracket for your refrigerator, and may also be known as the dispenser control bracket. The function of this part is to hold the micro switches and the light socke...
$18.31
In Stock
(30)
PartSelect #:PS11723180
Manufacturer #:W10823377
In this kit you will find the support, the ice door, spring, and delay. The heater ribbon is no longer needed and therefore will not be included with this part. This kit works in t...
$71.44
In Stock
(21)
PartSelect #:PS11750673
Manufacturer #:WPW10225581
If you have ice building up in your freezer, or if your freezer is getting too warm during the defrost cycle you may need to replace the bi-metal defrost thermostat. The function o...
$37.45
In Stock
(31)
PartSelect #:PS11739232
Manufacturer #:WP2198202
This thermostat assembly is used in refrigerator units and freezers as a sensor. The thermostat senses the temperature increase in the evaporator during the cycle of defrosting and...
$86.13
In Stock
(19)
PartSelect #:PS11739222
Manufacturer #:WP2196157
The icemaker water fill tube provides water to the icemaker so it can produce ice and dispense water. If you notice that your ice maker is not making or dispensing ice, or is leaki...
$5.67
In Stock
Questions and Answers for 10650022001
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No ice

  • Customer: Daniel from Suwanee, GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 542 of 637 people found this instruction helpful
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours. read more

Front Door Ice Wouldn't Work And Air Going Into Freezer

  • Customer: BILL from BATESVILLE, MS
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 484 of 569 people found this instruction helpful
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks read more

Refigerator door was not closing all the way if not pushed shut.

  • Customer: Norbert from Sugar Land, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 358 of 374 people found this instruction helpful
Remove the top hinge cover. Removed the top hinge support. Lifted the door from the bottom support. Old door cams were worn completly flat. Replaced the lower door cam and closing cam use a little vasalene for lubricant on the cam surfaces. Placed the door back on the lower hinge support. Replaced the top hinge support. Door is closing great now. read more