Maytag/Maytag_Thumb/37272.gif
See part 45 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Outer Tub to Pump Hose

★★★★★
★★★★★
13 Reviews
$ 24.91   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11738880
Manufacturer Part Number WP213045
Manufactured by Whirlpool
Product Description

Outer Tub to Pump Hose Specifications

This hose connects the outer tub to the pump of your washing machine. It is twelve inches long and all black in color. This hose is made entirely of rubber.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, Jenn-Air, International.
Part# WP213045 replaces these:
AP6005820, 213045
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Serge
    November 28, 2018
    My washing machine does not spin pa bienele runs fast enough and the laundry rst soaked with water, as if the engine did not want to turn fast
    For model number LA9400 Maytag
    Hi Serge, Thank you for your question. If the washer is not spinning, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the belt, the glide and spring kit, the brake assembly, the lid switch assembly, the tub bearing kit and the drain pump. I hope this helps. Thank you and have a great day!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Maytag Washer Outer Tub to Pump Hose

      Customer Repair Stories
       Average Repair Rating: 3.6 / 5.0, 19 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Leaking water
      Well, I found the washer leaking water from the bottom a couple weeks ago. I finally got around to pulling off the front panel and ran a couple cycles to see where the water was coming from. Turns out the leak was at the plastic pump that does the draining after wash and rinse.

      So I got the model number and googled online. I found Partselect and they had every part I needed. Took me 10 minutes online to find the parts for my specific washer. I couldn't believe how easy it was. Parts came in two days...and this was right before Xmas.

      Anyways, changing out the pump was simple. Took 5 minutes to get it off and put the new one in. I decided to change the hoses and elbow siphon break as well while I had the thing apart as those parts were old...but still working well.

      Got the washer back together and the floor is dry as a bone. Perfect repair, really easy to do. Hardest part was figuring out how to get the front panel off.
      191 of 217 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      I had water leaking out of the bottom of the washer when it was washing a load of clothes
      I opened the front of the washer by removing the 2 screws on the bottom front of the washer, then swinging the front upward until it was clear of the hangers at the top. The hose sits right in front. It was cracked where it attaches to the tub. I loosened the hose clamps at the tub & the pump with a nutwrench & removed the old hose. I slid the clamps onto the new hose & put the hose on to the tub & pump. I tightened the clamps, reinstalled the front & was finished.
      • Paul from Lansdale, PA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver
      • Parts Used:
        WP213045
      11 of 13 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Washing machine was leaking water from the bottom.
      Hardest part was figuring out how to access the internals (not through the back or the top) It turns out there are two screws on the lower front of the machine, not easily found, which when removed allow the front panel of the machine to swing to front and out of the way allowing full access to the internals from the front. The water was comming from one of two water pump hoses. The hose was held in place with 1" hose clamps and was easily changed out.
      • Pedro from Portland, TX
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WP213045
      7 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Water leak from Water Inlet Valve and tub to pump hose
      Water Inlet Valve: Unplugged machine from the AC receptacle!! Disconnected inlet hoses from valve, removed 5/16" screws securing valve to machine rear cover, removed wires from valve, disconnected the fill hose at the valve being careful not to let it fall into the machine, attached the same hose to the new valve along with the wires being careful to make sure they were attached to the right connectors and attached securely, placed the valve into the place where the old one had been and secured it with the aforementioned 5/16" screws, Done!!
      Hose: Removed front machine cover by removing two screws at the bottom of the machine, removed to clamps, pulled hose from connections, replaced hose with NEW clamps!! Done!
      • Edward from Tampa, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers
      • Parts Used:
        WP213045, 205613
      6 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Water drip
      Remove frt cover to confirm leaks. Removed clamps and installed new hoses. Run washer to confirm repair. Washer is 58 years old and costs are less then 50.00 to fix every 4 years
      • larry from LAKE CITY, MN
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers
      • Parts Used:
        WP214433, WP213045
      5 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Water was leaking from under washer
      Frist remover the two screws from washer front. The ones that are about 5 inches from the floor. Pulled front cover toward me and removed. The hose was right in the front that was cracked. It was held on by two hose clamps. I just removed the old and put in the new. No more water on the floor. Shipping was fast for the hose too. They said that if they recieved the order by 3pm it would be shipped the same day. I order at 3:01pm Sat. recieved Tuesday.
      • tina from north bennington, VT
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP213045
      5 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Washer leaked water during spin and drain cycle
      Since the washer is 28 years old, my first impulse was to rush out and buy a new one. However, I'm a DYI'er and I figured what do I have to loose by taking the front panel off (I had seen this done by the Maytag Repairman) and checking things out. After removing the two screws located near the bottom front of the panel, I pulled out on the bottom and the panel easily came off. I couldn't see any evidence of leaking water so I thought, "what would the Maytag Man do next". I figured "he'd run through a cycle to see if he could find the leak" so that's what I did. Sure enough, as soon as the spin and drain cycle came on, the source of the leak became apparent. There is a slight vibration during the spin which caused the hose to fail.

      I then got on my computer, Googles "repair parts for Maytag Washer" and found Parts Select.Com. I was surprised (to say the least) to find the part I needed in stock. I place my order on Sunday morning and the part was delivered the following Wednesday afternoon. I installed the hose and replaced the front panel and was washing a load of jeans within 20 minutes.

      I appreciate the service provided by Parts Select and will be ordering again when the need arises.

      Tom Nelson
      Fort Worth, TX
      • Thomas from Fort Worth, TX
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver, Screw drivers
      • Parts Used:
        WP213045
      5 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Leaking water
      Washer originally purchased from Sears. Called Sears for repair. $65.00 to show up. Diagnosed the problem as a Bad belt and pump. Asked for approx. $250 to repair. I declined and ordered a belt and pump from PartSelect.com for half the cost. Took 10-15 minutes to install. Turned the washer on and put it through a drain cycle, it leaked all over the floor. Turns out the only problem was a cracked Outer Tub to Pump Hose. It took about 10 minutes to install. Whala, no leak. Now while I purchased an un-needed pump and belt from PartSelect.com, not their problem. Even though I purchased two items that were not required, the cost was still half of what Sears wanted to charge me for a repair that would not have fixed the problem. I will certainly continue to use and recommend PartSelect.com.
      • David from Fountain Hills, AZ
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver, Screw drivers
      • Parts Used:
        WP213045
      5 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Washer leaking at the front.
      Our Maytag (A308) washer is now about 29 yrs old. I put in a PartSelect water valve 3 yrs ago. When it started leaking recently I found the cuplrit to be a flexible hose to the outer basis. The front came off easily (two screws at the bottom) and the hose clamps required some cleaning. I recommend purchasing new clamps. Under 30 minutes to get it running again.
      • Ronald from Madison, NJ
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP213045
      4 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      leaking hoses and low tension on belts
      opened front of washer, removed motor, replaced glides and springs, installed motor and replaced belts. Installed new hoses and vacuum breaker. Its been a week now and no leaks or other problems.
      • john from COTTAGE GROVE, MN
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Pliers, Socket set
      • Parts Used:
        WP22001448, WP213045, 206638, 205000
      4 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      13 Reviews
      4.9
      Filter By Rating:
      • 5 Stars
        12
      • 4 Stars
        1
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11738880
      Manufacturer Part Number: WP213045
      Brand
      Model Number
      Description
      Maytag
      6349
      Washer - MAYTAG AUTOMATIC WASHER
      Maytag
      6359
      Washer - MAYTAG AUTOMATIC WASHER
      Maytag
      A110
      Washer - Top Loading
      Maytag
      A112
      Washer - Top Loading
      Maytag
      A16CA
      Washer
      Maytag
      A16CM
      Washer
      Maytag
      A16CT
      Washer
      Maytag
      A182
      Washer - Top Loading
      Maytag
      A18CA
      Washer
      Maytag
      A18CM
      Washer
      Maytag
      A18CT
      Washer
      Maytag
      A21CA
      Washer
      Maytag
      A21CM
      Washer
      Maytag
      A21CT
      Washer
      Maytag
      A22CA
      Washer
      Maytag
      A22CM
      Washer
      Maytag
      A22CT
      Washer
      Maytag
      A23CA
      Washer
      Maytag
      A24CA
      Washer
      Maytag
      A25CA
      Washer
      Maytag
      A25CAE
      Washer
      Maytag
      A25CM
      Washer
      Maytag
      A25CME
      Washer
      Maytag
      A25CS
      Washer
      Maytag
      A25CT
      Washer
      Maytag
      A26CA
      Washer
      Maytag
      A26CAE
      Washer
      Maytag
      A26CD
      Washer
      Maytag
      A26CDC
      Washer
      Maytag
      A308
      Washer - Top Loading

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service