BLADE CONF FAN Assembly

Hello Angela, thank you for your question. This model doesn't have a clip that fits on the end of the shaft but a compression ring mounted to the center of blade so it fits snugly on the shaft. To install this part, simply pull the old fan blade off and slide the new one onto the shaft. I hope this helps.

Hello Angela, thank you for your question. This part does not come with the clip. If you would like us to provide the part number for the clip please resubmit a new question with the model number of the appliance included.

Hello Frank, Thank you for the question. We suggest checking the fan at the back of the freezer to see if there is a ice or frost build up causing friction on the blades. We hope this helps.

Hi Larry, Thank you for your question. If your refrigerator is not cooling, you will likely need to replace the condenser fan motor and possibly the start relay and capacitor. You should also check the electronic control board, the temperature sensor and the defrost thermostat. We have included some links that you may reference on how to check these parts and some others as well. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!

Hello Paul, Thank you for writing. The Air Damper above the Fresh Food Section can be replaced. Unplug the fridge, remove the light cover, and the damper will be behind some Styrofoam. We hope this helps!