This is a heating element compatible with various makes of ranges and ovens and is sold as an individual part. Measuring 20.5-inches wide and 20.25-inches (with terminals) long, this heating element is a genuine OEM part. If your range is not heating during the bake setting, not heating evenly, or if the element is burnt out or damaged, the element will need to be replaced. This repair is simple and only requires that you disconnect your oven from the wall outlet and use an appropriate screwdriver to disassemble and replace the element with the additional support brackets to secure it.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Maytag, KitchenAid, Jenn-Air.
Part# W10779716 replaces these:
AP5970727, W10289097, W10774342, W10779716VP
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
59 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
November 19, 2017
The replacement baking element looks different than my old one, do i need to move brackets over to new one or are there some instructions on how to install the replacement
For model number MER8674AB0
Hi Wayne,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the bake element. The element may appear different from yours, but the ends are the same You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
20 people found this helpful.
Was this helpful?
Thank you for voting!
Terrence
November 16, 2017
Will a bad oven sensor cause the oven to take an extremely long time to reach selected temperature, and cause food not to cook thoroughly (on the bottom) when the oven says it has reached temperature? If not,can you possibly suggest a cause?
For model number WFE714HLAS0
Hi Terrence , Thank you for the question. Yes the Oven Sensor can cause this.I suggest testing the sensor to see if it is defective.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Kevin
October 24, 2017
I need the lower baking element. The diagram image looks different from the part in my oven. The lower and upper elements connect to the back in the "center" of the oven wall. The parts diagram shows them with an offset to the lower left side.
For model number WFE540H0AS0
Hi Kevin,
Thank you for your question. This would be the correct bake element for your appliance. I hope that helps. Good luck with your repair.
9 people found this helpful.
Was this helpful?
Thank you for voting!
Carrie
December 3, 2017
How do I know if I need a new sensor or a new baking element? Oven takes a long time to reach the temperature desired. Once it does, the food is uncooked on the bottom of the pan and overcooked on the top of the pan.
For model number MER8674AW0
Hello Carrie,
Thanks for your question. Your issue is more likely due to the sensor, but we would recommend using a multi-meter to test both the sensor and the bake element, and replacing either if they are not showing continuity.
I hope this helps.
Looking for 3600 watt baking element for this stove. I asked earlier today and your expert replied with a part no. D29142 . When i looked this part up it is a capacitor kit.You must have sent me the wrong info. Could you send the right no. For a baking element 3600 watts. Thanks
For model number ywfe540h0aso
Hello Tom,
Thank you for your question. We apologize for the previous confusion. The part number for the baking element for your model is under part PS11703285. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
George
December 22, 2019
Hi I need an upper element for my Whirlpool stove do you have any and how much
For model number YWFE710H0BS0
Hello George, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11703285. Please enter the part number into the site for the current price and availability. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Alexandre
January 16, 2020
Does this element fit on my oven (3600w) ?
For model number YMER8880BS0
Hi Alexandre. Yes this part W10779716 is compatible with your model YMER8880BS0. Thank you for your question and good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Ronald
December 17, 2018
My bottom heating element in my oven has burnt out not sure of my part number looks like w10779716 is this correct
For model number Mer8700DS1
Hi Ronald,
Thank you for your question. Yes the correct part for the bake element is W10779716. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Virginia
January 28, 2019
I have Maytag model mer8674ab0 oven that needs a replacement heat element which is under a heat cover. It has a two pronged sections that fits into the bottom middle of the back of the oven. What element is compatible? It is square shaped. The one in the diagram for the oven has the prongs on the left. That is wrong. I need a middle pronged piece. Which do you recommend.
For model number MER8674AB0
Hi Virginia,
Thank you for your question. The part number listed under your model number for the bake element you described is PS11703285. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Keith
February 6, 2019
I replaced the thermal fuse-thermostat, checked the heating sensor and it was in range for ohms 1085. Both top and bottom element still will not heat. I checked the wiring harness and there is no burnt or loose wires. Trying to figure out the next step?
For model number MER8674AWO
Hello Keith, thank you for your question. Since the sensor is testing within range and there are no burnt or broken wires on the elements the electronic control board would have to be replaced, Part Number: PS11756979. Good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your Whirlpool Range Bake Element
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 25 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bottom heat element burned out
Unplug from power source, remove panel on back of range, unplug power connections for bottom element on back of range, remove bottom pan in oven installed element, put back together in reverse. Video on parts select website is the bomb!
Robert from CHURCHTON, MD
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old element burned up
Took out the bottom tray and the back cover panel, unplugged the old element and plugged the new one in and reassembled
Doyce from AZLE, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element failed
Unplug range, remove cover from back of range disconnect red wires from element spade connectors. Remove oven racks, remove two screws from back of bottom tray, and remove tray. Remove screw from element bracket and remove element. Install new element and repeat steps in reverse order. Done.
Jeff from HOLLYWOOD, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element had burnt out
Unplugged stove-Removed oven door two screws held the oven bottom pan removed same to observe the element removed thre fasteners removed inspection cover on back of the oven pulled off two electric wires replaced element reassembled easy job
Richard from HAMPSTEAD, NC
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken lower heating element
Shut beaker off Unhooked wires on element back of stove Removed all racks Unscrewed lower plate cover Removed element Inserted new element Rebooked wires to element Reinstalled cover plate Turned breaker back on Turned range on and let heat up Turned it off Reinstalled racks
Rodney from MC CONNELLSBG, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
After watching the video, I said to my wife that this is a simple installation. However, I’m looking at the screws, I did not have the correct screwdriver to remove the screws. I had to go out and buy that. After that, it was not a problem.
I first shut off the breaker, then, after pulling the stove away from the wall, I unplugged it. I removed the two screws in the back of the stove which came off easily. I removed the two screws inside the oven and removed the bottom plate. I noticed the heating element I was changing had braces along the bottom. I had to remove the two screws and removed the burnt out element. The new element did not have the braces the original element had, but it fit in perfectly. Then I replaced all the screws, plugged it in and turned on the breaker and it worked. The only thing that we noticed is there’s a clicking sound every time the temperature increases. Not sure what that is.
Tom from THE VILLAGES, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electric oven was not heating up
I read the help section and it said that the element was likely to be the problem (84%) and the fuse had a 14% chance to be the problem so I purchased both. After watching the video I tried the element first and that's what it was so I returned the fuse, Thanks for the help and video.
The company said it would cost me $698 to repair. I had a 2 year warranty and that was 2 months out of date.
Again thanks for the help.
Daniel from SARANAC LAKE, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bottom heating element was damaged and needed to be replaced.
Followed a video I found online showing how to replace the bottom bake element. It was very easy to do. I simply unplugged the over, removed the back wire cover and detached the damaged element connectors.
I then removed the bottom oven cover which conceals the element. Unscrewed and removed the damaged element and replaced it with the new one. Connected the wires to the new element and then Installed the bottom cover along with the back wire cover and plugged the oven back in. It was really this easy.
Anne from DREXEL HILL, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The oven wasn't heating up to temperature. Kept showing it was preheating but never got there.
We watched the excellent video and followed the steps. We're in our 70s which is why we needed a flashlight to see the screws in the oven! So if we can do it...
Susan from NEWTON, KS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Oven Baking element burned out from 5 years of use.
The You Tube video for replacing the Element was very useful. Let me know exactly how to proceed - it was easy.
Gordon from BELDENVILLE, WI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
112 Reviews
4.9
Filter By Rating:
5 Stars
100
4 Stars
10
3 Stars
2
2 Stars
0
1 Star
0
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William C - June 29, 2023
Verified Purchase
Worked Perfectly
The oven element fit and worked perfectly and was very easy to change. I'm glad I decided to do it myself instead of spending hundreds of dollars hiring a repairman. You can do this.
★★★★★
★★★★★
Mark E - June 2, 2023
Verified Purchase
Easy repair-great part-would definitely deal here again!
Everything was fast and simple. Stove is up and running again.
★★★★★
★★★★★
Donald M - May 17, 2023
Verified Purchase
Works As Advertised. I'm Very Happy
The new element arrived on time, packaged well and in great shape.
I watched an online video to make sure I knew what I was doing, then got my tools together and went at it.
Out with old and in with the new in less that 20 minutes.
I'm happy the baking element was still available. I found out the broiler element is no longer available. Hopefully, that part continues to operate without issue.
Overall, a great experience. I highly recommend PartSelect.
★★★★★
★★★★★
Charles M - April 16, 2023
Verified Purchase
Easy Repair
The part arrived as promised and works fine. Strawberry Cake in the oven!
★★★★★
★★★★★
Jeff D - March 25, 2023
Verified Purchase
Great customer service
Received a replacement bake element from PartSelect, Unfortunately, it was delivered damaged. The shipping box had been totally destroyed and the element was bent in a 45 degree. I contacted customer service and they had me forward pictures of the damaged element to them. I immediately received confirmation for their receipt of the pictures and was told a new element was being shipped. 2 days later the element arrived and I installed it in about 20 minutes. Very easy task. Only tool need was a #2 Phillips head screwdriver.
★★★★★
★★★★★
Deborah C - March 23, 2023
Verified Purchase
Easy repair
Great
★★★★★
★★★★★
Anthony M - February 13, 2023
Verified Purchase
For the love of pizza
I came home to a disappointed wife, a chromatoasted element and no pizza.
It harshed my mellow.
With a model number, a quick search and an order, harmony was restored to the universe, delivered by UPS.
A few screwdrivers and a bit of help from curious cats, the supply of pizza and flow of beer returned to the land.
★★★★★
★★★★★
Michael M - February 11, 2023
Verified Purchase
Perfect match
Easy to install, priced right
★★★★★
★★★★★
Tracy S - February 6, 2023
Verified Purchase
Fast delivery
Just as expected, easy install
★★★★★
★★★★★
Thomas L - January 28, 2023
Verified Purchase
Perfect part for the job
Just as described and thanks to the video easily installed. Oven once again works as desired. Thanks
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11703285
Manufacturer Part Number: W10779716
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
