Part Location Diagram of WD18X10034 GE Inlet Sump
See part 505 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Inlet Sump WD18X10034

★★★★★
★★★★★
2 Reviews

Rated by 4 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 36.34
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS1018856
Manufacturer Part Number WD18X10034
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Leaking | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD18X10034 replaces these:
AP3875613, 1168285
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Leaking hose
You tube
Just mack sure the electric is off - breaker and live wire check pre starting
Other Parts Used:
CLAMP Adaptor Pump Assembly Inlet Sump CLAMP
  • JANET from SANDY SPRING, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dripping
Replaced the plastic piece. Simple
  • William from Hoschton, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mouse Ate Pump Inlet Cover,
Removed dishwasher from counter tiped it over and replace the inlet cover removed the back of the front door and replaced the switches
Other Parts Used:
Switch Interlock Inlet Sump
  • Robert from Belford, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rodents ate the sump inlet so machine leaked everywhere!
Turned off electric at the fuse box and shut off the water. Pulled the dishwasher out and took out bottom sprayer (pull up and twist), filter basket etc. Then put the washer on its back and removed sump inlet and adaptor. This entails removing a couple of hose clamps and 4 bolts that hold sump inlet in place. Replaced with new. Turned over the machine and reinstalled the filter basket and sprayer after cleaning them. Reconnected the water and turned on the power. Machine works like new!!! Total parts cost me less than $50. Repair guy wanted around $300 to do it!!!!
Other Parts Used:
Adaptor Pump Assembly Inlet Sump
  • Hossein from Tarrytown, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
15 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
September 18, 2023
is the inlet sump supposed to hold water when not in use
For model number GLD4200L00BB
PartSelect logo
Hello Scott, thank you for reaching out. The sump inlet is attached to the bottom of the dishwasher tub. The main purpose of the sump inlet is to collect water for the pump. If the water is stopped and not draining, then the most probably the sump filter is blocked. The sump filter removes food particles and debris from the water to prevent the drain from clogging. We would recommend replacing the sump filter and cover, part number PS2370522, to fix the issue. The sump filter comes with the filter cover. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1018856
Manufacturer Part Number: WD18X10034
Brand
Model Number
Description
General Electric
4070100
Dishwasher
General Electric
4070110
Dishwasher
General Electric
4070500
Dishwasher
General Electric
4070510
General Electric
4070600
Dishwasher
General Electric
4070610
Dishwasher
General Electric
4070800
Dishwasher
General Electric
4070810
General Electric
EDW5000L00BB
Dishwasher
General Electric
EDW5000L00CC
Dishwasher
General Electric
EDW5000L00WW
Dishwasher
General Electric
EDW5000L15BB
Dishwasher
General Electric
EDW5000L15CC
Dishwasher
General Electric
EDW5000L15WW
Dishwasher
General Electric
EDW5060L00SS
Dishwasher
General Electric
EDW5060L15SS
Dishwasher
General Electric
EDW5100N00BB
Dishwasher
General Electric
EDW5100N00CC
Dishwasher
General Electric
EDW5100N00WW
Dishwasher
General Electric
EDW5100N10BB
Dishwasher
General Electric
EDW5100N10CC
Dishwasher
General Electric
EDW5100N10WW
Dishwasher
General Electric
EDW5160N00SS
Dishwasher
General Electric
EDW5160N10SS
Dishwasher
General Electric
GFLD560N10BB
Dishwasher
General Electric
GFLD560N10SS
Dishwasher
General Electric
GFLD560N10WW
Dishwasher
General Electric
GFLD560N15WW
Dishwasher
General Electric
GHD4309L15BB
Dishwasher
General Electric
GHD4309L15CS
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service