Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Scott M - September 29, 2020
Verified Purchase
Great part, easy repair. Old part had shorted, new part worked perfectly!
I received a thermal switch, to match the part that shorted in a relatively new BOSCH Microwave oven. Thank you for having the right parts!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Microwave would run for 30 seconds and shut off
Thermal switch on top of Magnetron was defective, spade contacts were burned and loose. New switch $6 +shipping. Removed top cover held on with several Philips head screws. Plugged unit in and gave it 30 seconds to test the fan was working, it was. Put 500ml water in cavity, ran it for 60 seconds, which after fiddling with wires it did,
... Read moreand got over 20C temp rise so magnetron was working (detailed instructions online). Switch is right on top of magnetron. Tried to remove spade lugs but lugs pulled out of switch so I cut the lugs off and removed the broken switch. Screwed down new switch using old hardware. Trimmed wires back and cleaned them. Used crimping tool to put on new spade lugs from car parts store. put heat shrink over lugs and wires to strain relief and buttoned the unit up. Microwave works fine and oven baked a cake so good repair.
Bosch HMC 80251UC microwave oven combo, unit does not working.
Bosch HMC 80251UC microwave oven combo known for its many problems. Dim LED display and others issues. This was a third round of replacing parts. Unit was working for a week. While in use the unit abruptly quit working agai. I am puzzled what else to replace now. Replaced door switches three times. I suspect another (green Botton) sw
... Read moreitch again. The whole unit is heavy and need two people to pull out of the cabinet.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Phil
March 2, 2020
Hi, my useless Bosch oven is playing up yet again. The oven shows it's reached the set temp but it actually hasn't? I replaced the heater coil recently (purchased from partselect). Could the problem be heat sensor?
For model number HMC80251UC/01
Hello Phil, Thank you for the question. We suggest testing the Sensor with a multi meter to check for continuity. We hope this helps.