Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
January 22, 2020
Getting error code f2e1 stuck/shorted key. Is this the part i need?? thanks
For model number WEG745H0FH0
Hello and thank you for writing.
Yes, it is the part you would need. F2-E1 - Touch Pad (Keypad) Cable Unplugged - Check the connection between the touchpad (keypad) and control board (clock) to make sure it is secure. Select the 'cancel' function and wait 60 seconds. If error code reappears then replace the touchpad PS10060049. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
November 2, 2023
I am experiencing the F2E1 code. Not sure if the problem is with the touch switch module or something else. Any input from you would be appreciated.
For model number WEG745H0FS0
Hi Mike, thank you for the question. The F2E1 error code indicates that the control board is not detecting the keypad assembly on the control panel. First, you may need to make sure that the connector ribbon that plugs into the control board is making good contact. If that is not causing the issue, then you may need to check the electronic control board, part number PS11756686, as it is most likely faulty and may need to be replaced. We hope this is helpful!
