ZISW420DRH General Electric Refrigerator - Instructions

Temp. Sensor was under an egg shaped cover on the left side wall in the refrigerator. Remove the cover, cut the two wires to the old sensor and remove it. Connect the new sensor to the two wires using butt connectors. Replace cover and done.

Just like installation video said. One error I did not read first note that check to see if line was frozen, which it was. Nothing wrong with valve, but changed it anyways. Works great now. Thank for all the help. You all are great.

Tips: Watch the video on installing ice flapper installation. when removing trim, watch how he does it in the video VERY closely -you bend the trim towards the outside to disengage the clips, if you just pull out you will break the clips. the light had fused the plastic sides to the inside of the dispenser housing so the judicious application of force was required to get the white plastic housing out. when installing the new funnel, be sure the tab goes behind the switch and the spring goes around the pivot opposite the switch with the leg of the spring on top of the white plastic housing. (My funnel fell out in pieces so I had no idea how it was originally installed.)