All Installation Instructions for Whirlpool Dryer YWED8200YW0

Felt wears on the dryer lint screen

No repair. Just replaced the screens in the dryer and they slide in and out to clean. The felt gets worn fast.

Parts Used:

Lint Filter

Judy from Cloverdale, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

lint filter coming apart

removed old one, threw it away, and inserted new one.

Parts Used:

Lint Filter

Alan from Oklahoma City, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Squeak and Rachet type noise

The videos really make it easy. I put my laptop on the washer next to my dryer and proceeded step by step. I also found the video that mentioned about the screws that may come loose on the baffles. I found several loose screws on the baffles which I tightened and I also found the Drum hole plug loose, so I also tightened the plug. Reassembled the unit and has been working like new since.

Parts Used:

Dryer Repair Kit

Brian from Mertztown, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers

Was this instruction helpful to you?

Thank you for voting!

Door Catch broken

Very easy to replace, just removed the door catch and place the new one in and push till clicked. That simply.

Parts Used:

Door Catch

Marie from Downers Grove, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Felt on lint filter came off.

Just put the new lint filter in.

Parts Used:

Lint Filter

Mike from Rocky River, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Dryer stopped heating

(Always unplug dryer before making any repairs) I opened the dryer and checked the heating element. Making sure that the connection was good and nothing was damaged, I determined the problem was overheated wires. They melted and lots connection. I replaced them with the heating element wire connection kit. Easy to install and simple to get right. I cleaned the dryer again with a vaccum cleaner, removing all the lint, and checked the vents, making sure they were clear...I turned the breaker on (it was tripped when the dryer overheated)and everything worked great.

Parts Used: