Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WWEF3006KWB > Instructions

WWEF3006KWB Westinghouse Range - Instructions

All installation instructions for WWEF3006KWB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WWEF3006KWB
421-435 of 709
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Element broke in two

  • Customer: NICOLLE from EADS, CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
My husband fixed it in about 30 minutes or less. He said it was a piece of cake!

baking element burnt out

  • Customer: Deborah from Deatsville, AL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
It was so easy. We pulled the stove away from the wall and unplugged it. My husband used a nutdriver to unscrew the two screws holding the element in place. He unplugged the wires from it when he pulled it out. He plugged the wires to the new element, screwed it back in place and voila! I was ready to bake. So very easy.

broken bake element

  • Customer: MICHAEL from POINT PLEASANT, WV
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
nothing to it

the stove eye would go to high and stay

  • Customer: ronnie from cana, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
watched the veido first then un pluged the stove then i took out 6 screws and 2 from the switch and reversed every thing

Lower heat element quit working

  • Customer: Donna from Taylorville, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Undid two screws; removed old element; inserted new element and placed the bracket and two screws to hold in place.

Needed to replace the bottom heating element in my oven

  • Customer: Ilene from Albuquerque, NM
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I watched the video--that was very, very helpful. My son helped me, but I think I might have been able to handle it without him after watching the video. Also, your price was far less than half of what another website quoted for the same heating element.

Oven not heating

  • Customer: Steve from lake Hiawatha, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Removed oven from wall, disconnect power source, loosen nuts from element, pull element out, disconnect wires, hook up wires to new element, put back nuts.Plug in and it worked great.

Bake element burnt out

  • Customer: Elizabeth from Houston, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Disconnected power; unscrewed element from oven wall; pulled element off of contacts. Pushed new element onto contacts; screwed to oven wall

Bake element caught fire and stopped working

  • Customer: Megan from Savannah, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
After in I found my oven glowing from the small fire inside, I thought I was in for an expensive repair or complete replacement. Part select helped me find the exact part I needed and the video showed me just how easy it would be. $40 and 15 min later my oven was fixed and I was baking again! The repair consisted of removing two screws and simply removing and plugging in the new bake element. Thanks for the help!!

Purchased home where previous owner melted Aluminum Foil to bottom panel of oven.

  • Customer: Michael from Wimauma, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed 2 screws from rear of panel and dropped new panel in. Re-installed screws. Oven like new again. Aluminum foil was burning and emitting foul odor when oven was on.

Front Glass Broken

  • Customer: Alice from Panama City, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
That was so easy! I found a Youtube Video, verified that mine worked exact same way, found out that I also needed the top plastic part, ordered online, arrived super fast, so I carefully put everything back together. Extremely happy to see it fixed again. Thank you!

replace oven element

  • Customer: Cathy from Farmersburg, IN
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
good

Control Rod On Switch Was Broken Off

  • Customer: Richard from Williston, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I looked at video and followed the instructions from the man in the video. I pulled out range and then unplugged range from electrical outlet. I removed screws from back and took back off. I then took the two screws out from front of switch. I pulled switch out and then removed one of the wires off and placed it in the same place on the new switch. I did same on the other two wires. I then put switch back in place and tighten the two screws on front. I replaced the back on the range. I plugged range back into the receptacle, pushed range back in place. I put control knob on and then turned it on. The eye worked fine. Very easy!

Infiniti switch needed to be changed.

  • Customer: Ralph from Peoria, IL
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Quit after getting shocked. New part had different configuration. Hard to see marking for pull and plug from old switch to new switch. New switch had different configuration. After all that and making sure switch worked, got shocked as stove was pushed back to wall. Some other issues with wiring has a shorting out problem. Maybe time to call a pro or get rid of the stove and get the gas stove we have been longing for. Be sure to match points on pulling and plugging as the configuration may be different.

heating element no longer worked

  • Customer: Maryann from Roberts, WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 0 of 0 people found this instruction helpful
pulled out the range and unplugged the range from the outlet! removed the oven racks. unscrewed the heating element and pulled out the wire connections a bit so i could grasp the connectors better and so they would not go back into the holes. getting the bad element off the connectors was the most difficult part of the process - this is what took the longest for me. I used pliers to grab the heating element connector and wiggle until it came loose from the connectors. once off, it was pretty simple to re-connect the replacement element and tuck everything back and screw the element back onto the oven wall. WA-LA!! back in the baking business - kids and mom are happy again! temp needs calibrating, but should be able to figure that out....thanks much!
All Instructions for the WWEF3006KWB
421-435 of 709