All Installation Instructions for Roper Dishwasher WU3006X6

my old lower dishwasher rack was rusted out and some parts broken.

Snapped on the rollers, removed the center part from the old rack that sprays the water and snapped it on the new one. We then bent the back row down so it would acomodate my larger items. My old rack had that feature. You could either have the rack up or down. Now l
ooks beautiful and works perfectly.
Could have used some directions though.

Parts Used:

Lower Dishrack Kit

Kathy from ELGIN, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dishwasher would not dispense soap

Both springs (8066018 and 3368999) were replaced as recommended in your troubleshooting guide, but did not resolve the problem. Finally the Dual Motor, 3374501, was replaced. During the above, the plastic face of the door fell off, which created a nuisance task before proceeding to fix the original problem. However, while replacing the motor, I realized the purpose of the two, T-shaped studs sticking out of the motor. It is absolutely necessary that these sit inside the slots which engages the sliding plastic cover, which is spring loaded, in order to engage the release of the soap dispenser door. It was truly a learning experience, but I got it done.

Parts Used:

Door Spring

Louis from CHESTERFIELD, MO
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Soap door wouldn't open.

I looked online to see a video. Dad to pop lid off soap dispenser. Slide a plastic part to the left n the spring slide off. Video showed how to place prongs on spring . Then had to lift the upper part of spring to lift onto plastic part of soap dispenser. That was it.

Unfortunately it still doesn't work. I asked Ina email to your company for any suggestions, No reply.

Parts Used:

Spring, Lid

Anthony from CLEVELAND, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

dish washer leaking out bottom of door

New gasket did not fix problem. Cleaned air vent cover for steam to exit. Gasket not the problem but new one looks good. thank you

Parts Used:

Dishwasher Door Gasket - Gray

Ed from Ulysses, KS
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dishwasher don't drain after cycle ends

follow the video, no problem, however, its still not draining after the cycle is finish now I don't know what to do.

Parts Used:

IMPELLER

Juan E from LOS LUNAS, NM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Lost the cap to the Rinse aid container in door

Ordered part, recieved part package, opened package, inserted screw cap rinse aid tank cover, twisted to close. Job completed. Time required about 15 seconds from opening package. Service was excellent and accurate. Thank you.

Parts Used:

Rinse Aid Cap

Bruce W from WESTERLY, RI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

lid from old basket to be installed on new

Simply bend the lid so hinges slip out of sockets, and repeat to put the lid in the new basket.

Parts Used:

Basket, Silverware

Fred from WOODBURY, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

One door spring broken, replaced both

As described with instructions, removed original "bearing," installed replacement, removed original spring, installed replacement springs. Not difficult.

Parts Used:

Heavy Duty Spring Kit

Donal from SPRINGVILLE, TN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Lost Screws from lower access covers for my Dishwasher

Reassembled lower access covers using the new screws purchased from parts direct, perfect fit replacement. Hardest part remembering how they fit Dishwasher.

Parts Used:

Screw - 8-18 x 1/2

Johnny from LEVITTOWN, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Rack Was Rusting Out

Kit didn't have the center conical piece. Easy to switch tho. I am impressed at the speed of which the part arrived.

Parts Used:

Lower Dishrack Kit

William from Rochester, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

leaking around door

After cleaning the filter located on top left of door(used a screw driver to pry out) and following the install gasket video problem solved.

Parts Used:

Dishwasher Door Gasket - Gray

Curtis from Enderlin, ND
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

THE LOWER RACK WAS CORRODING IN SPOTS AND WAS RUSTING

THERE WERE NO INSTRUCTIONS INCLUDED, COULDN'T FIGURE 0UT HOW TO INSTALL THE NEW ROLLERS ON THE NEW RACK FINALLY INSTALLED THE OLD ROLLERS ON THE NEW RACK AND THEY WERE MUCH EASIER TO INSTALL I DONT UNDERSTAND
WHY THE NEW ROLLERS WERE THE SAME AS THE OLD ROLLERS
EXCEPT FOR THE COST.

Parts Used:

Lower Dishrack Kit