This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This door strike is an authentic OEM replacement part that is compatible with various models of top-load washing machines. The door strike is located along the door frame, where it engages with the la...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This is an inlet valve for your washing machine. The inlet valve is an electrically controlled valve with a solenoid that opens and closes as needed, during the water filling cycle of the washing mach...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This agitator assembly is an authentic OEM part that is compatible with various models of washing machines. It consists of a central shaft with a series of fins attached to it. When the washer is oper...
This is a shift actuator, and is designed for use in washing machines. This shift actuator is made to change the mode of the motor between spin and agitate, as well as communicate with the control boa...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This lid lock assembly is specially designed for top load washing machines. It is a genuine OEM part that is guaranteed to fit like the original. It includes the lid lock switch and the wiring harness...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Benjamin
December 5, 2022
Won't turn on has power to machine replaced control board and when it came on was fine then started a load lid locked and control board popped and smoked and now won't turn on again
For model number WTW5105HW1
Hello Benjamin, thank you for contacting us. According to the symptom, it seems that the lid lock, part number PS12731130, is defective and the control board, part number PS16555301, is also damaged. You will need to replace both of these parts to resolve the problem. If you require assistance to place an order, please contact customer service. We hope that helps!
Won't turn on has power to machine replaced control board and when it came on was fine then started a load lid locked and control board popped and smoked and now won't turn on again. When it fist went out it died halfway through a load.
For model number WTW5105HW1
Hello Benjamin, thank you for contacting us. We would recommend checking the lid lock assembly, part number PS12731130, and the electronic control board, part number PS16620346. We would recommend carefully installing the board and making no mistake in connecting it. A wrong connection can blow it again. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
Hello Michael, thank you for contacting us. According to our research, F9E1 error code indicates that the washer is not draining in a timely manner. We would recommend checking the drain pump, part number PS12731241, to fix the issue. We hope this helps!
Hi, I have this model , the drain pump stays on all the time. I unplug the washing machine and plug it back in and the pump continues to drain.
For model number WTW5105HW1
Hi Manuel, thank you for your question! If your washing machine drain pump keeps running, it could result from a damaged control board assembly, part number PS12745389, a faulty drain pump, part number PS12731241, or a defective water level switch. A broken water inlet valve, part number PS12348013, could also be the culprit, or you may find that your drain hose is clogged or incorrectly positioned. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
