All Installation Instructions for Westinghouse Refrigerator WRT21MG3AW3

refrigerator door would not fully close

Took old gasket off and put new gasket into place. Part came in the mail in 2 days. Hardest part was finding the model number of the refrigerator.

Parts Used:

Refrigerator Door Gasket

Elizabeth from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Leaking Door Gasket

Open door remove old gasket, remove new one out of packaging install new gasket

Parts Used:

Refrigerator Door Gasket

Ulrich from Ontario, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

12 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken Refrigerator Door Shelf Retainer Bar

We took off the broken bar and put on the new one. It clips on. Took about 10 seconds and could have been done by a 5 year old.

Parts Used:

Door Shelf Retainer Bar

Ward from Stockton, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Leaky Seal

Just snaps in. Pull the old one out push the new one in. It has a groove it fits into no fasteners to undo, Just pull the old one out with steady pressure.

Parts Used:

Freezer Door Gasket - White

Travis from Tecumseh, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken bar and seal

Snapped in the bars and with the seal once on the track went right on

Parts Used:

Door Shelf Retainer Bar

Mark from Sandwich, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The Gasket was not holding tight and I replaced with a new one.

Just like you showed on you tube.

Parts Used:

Refrigerator Door Gasket

Kebreab from NASHVILLE, TN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My refrigerator handle broke

I watched the video online. It was so easy! All I needed was a screwdriver. It looks great.

Parts Used:

Door Handle

Rose from Catonsville, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Freezer and refrigerator stopped cooling

The site offers a video for this part which worked perfectly. In addition to replacing the part, since the cardboard panel was off, we also cleaned all the dust off of the coils which someone recommended to do annually.

Parts Used:

Run Capacitor

Amy from PITTSBURGH, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

8 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Retainer bar broke

Removed bars from doors snapped in new replacements

Parts Used:

Door Shelf Retainer Bar

Kathy from Weyers Cave, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

9 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken rack on freezer door

just slipped the part in place

Parts Used:

Freezer Door Shelf Retainer Bar

Louis from St Augustine, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bottom retainer bar on door shelf broke

took replacement part out of box and slipped it right into placed. could not have been easier

Parts Used:

Door Shelf Retainer Bar

Elizabeth from Shelbyville, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Lightning struct the house and fried the evap thermostat

Noticed the evap fan wasn't working, so trying to disconnect the wire broke the connection so had to order a new motor. Installed the motor but it still didn't work. Had a technician look at it and he said it was the control board. Ordered and installed control board and still didn't work. The only element left is the evap thermostat. Jumped the thermostat and it worked so ordered and installed a thermostat. It works now

Parts Used:

Evaporator Fan Motor Kit - 120V 60Hz

charles from parker, CO
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Socket set

8 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Switch would not allow door to close.

Removed screws holding unit and removed unit. Removed switch from connectors in unit. Replaced unit without switch. On day switch arrived (delivery was prompt) my wife replaced switch by attaching the two connectors and slipping into unit without having to remove entire unit. How easy was that!!!

Parts Used: