WRT18A0AWA Westinghouse Refrigerator - Instructions

its real easy, just by pulling the old gasket, in some spots the gasket was like glued, but with a flat screw driver a managed to pulled apart. finally,just attached the new gasket.

Opened refrigerator door, opened a Corona, took a sip,removed old gasket from its track by simply pulling out of the track with my fingers; took another sip, installed new gasket by lining it up and pressing it into the track with my thumbs (It's good to have opposal digits) starting at the top center and progressing clockwise, closed refrigerator door, minus one Corona. Sat on the patio and enjoyed the rest of my Corona. Life's good!

take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .

Used screwdriver to pry off edge of old gasket corner and peeled off old gasket. Snapped new gasket into door channel and made sure all the edges were seated. Took longer to open the shipping package than to do the repair.

Defros timer was easy I finished it in about 15 minuts but the defrost themostat was hard.I had ploblems with the wire conectors and the tape I had to use Twist-on wire connectors.I hope I will not have problems later.So far 1 week later it is working.I can't belive $50 saves me $600.Thanks to Part Select for the video and how fast they shipping my parts in less than 2 days.

Popped out the broken bar and popped in the new one. Took about a minute-very easy.

it was very simple , it just pressed right into place i was very impressed

unplugged frig,removed bottom front cover and loosend 2 screws at bottom front left and slid defrost timer out from behind metal panel,unplugged the old and plugged in the new.frig works great.

I watched the video you had on-line and it was simple. Thank you so much

When my side by side Kenmore refrigerator quit keeping the top half of my freezer and refrigerator cold I called Sears to see how much it would cost to get it checked out and fixed. Bottom line it was going to cost minimum $65 (which was just for him to come out) to $250 on up depending on what the problem was. So i decided to "do it myself"! I took it apart and within a few minutes figured out that it was my evaporator fan. So I went to sears to order the part based on the part number and with shipping and handling it was going to cost $125. While at sears I got on one of their computers and quickly looked up Kenmore parts and partselect.com came up and I quickly found the part for $62 and I chose overnight delivery and spent a total of like $83. When my part arrived I realized that the wiring/plug ins didn't quite match up. So I got online and went to their website and found a video for "do it yourself'ers" like me on how to splice the wiring to make it match. It took me about 20 min to splice the wire and put my refrigerator back together and IT WORKED! Easy easy easy and I saved moocho bucks! Ill never pay a repairman again. Oh and by the way, I am blond! :-)

We had no problem at all. My youngest brother and my 9 year old Son installed it. I was not there at the time but I assume it took no longer than 30 minutes. Thanks so much. Justino

The part I ordered arrived faster then I could have imagined, the fridge broke on Thursday night, I had the part ordered on Friday morning , received it by that same weekend and was up I. Running again in only three days!

Problem not consistent. OK for 2-3 weeks, then freeze coils. Mark and observe the defrost timers manual rotating adjuster. Timer would stop mid cycle. One revolution equals 8 hours of compressor run time followed by 30 minutes of defrost. Replacing timer took 5 minutes.

The new bar simply clicks on to the fridge door with no tools required.

1st. replaced the defrost thermostat pn 5303918214 did not fix it next replaced the defrost timmer pn 215846602 that did not fix it,next replaced the defrost heater pn 5303918247 still did not fix it,has the same problem as when I started I don't know what to do next guess will call for a service tech to come out,or get a new refridgerator. Looks like I wasted my money on these parts. Refridgerators are not as easy to fix as yall make them out to be. I have to say all the parts were easy to install and your instructions and videos were great, they just did not fix my refrigerator Thanks Tom