Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WRS6R3EW6 > Parts

WRS6R3EW6 Westinghouse Refrigerator - Parts

All parts for the Westinghouse Refrigerator WRS6R3EW6

Below is a list of all parts for the Westinghouse Refrigerator WRS6R3EW6 - White. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the WRS6R3EW6
57-70 of 271
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$84.01

COLD CONTROL

With refrigerators/freezers they have a thermostat that helps maintain the desire temperature.

$35.56

Wire Shelf

$30.95

Water Tube

Plastic tube, 5/16".

$30.17

Drip Tray

$29.32

Upper Freezer Fixed Shelf

The front trim is not included with this shelf.

$179.08

Adaptive Defrost Control Board

This part allows the refrigerator to go into defrost mode only when required and comes with the wiring harness. ***Please Note: This control will appear different than the original but will function the same.

$107.88

Icemaker Assembly

This icemaker is used on newer models where the cord will plug directly in to the back of the freezer. It includes the cover, fill cup, bail arm and a four-pin plug harness.

$30.66

Front Roller

$10.25

Shelf Trim

$9.01

Auger Nut

$35.60

SOCKET-LIGHT

$12.36

SPACER-FIXED BLADES

$8.72

Touch Up Paint - White

This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear....

$6.25

ICE STRIPPER

The ice stripper goes on the front of the ice maker and directs the ice cubes from the maker to the bin. Due to the frigid temperatures, the plastic breaks down and cracks from time to time. This may cause the ice cubes to get stuck in the ice maker and not dispense properly. You will need to open the freezer door, pull out the ice container by lifting and pulling out. Unplug the ice maker by releasing the locking tabs. Use your 1/4-inch nut driver to remove the screws holding the ice maker in place. Take the ice maker out of the freezer for easy access. The ice stripper can be removed by simply unlatching from the pin holding it in place. The new ice stripper should just click into place so the tab goes into the control head with ease.

All Parts for the WRS6R3EW6
57-70 of 271