WRS23W0AW1 Westinghouse Refrigerator - Instructions

first replaced dual solenoid, then ice maker. still not working. going to chase electrical next

It went okay. My husband did the job and he is handy. We both watched the little "How to" video and that was very helpful.

It was so easy the light socket came right out took out old undid clips (light was melted to socket)put new socket piece in reattached clips...light works...as far as the door not closing...unscrewed on screw took off plastic clip put it in and put the hinge bearing on top...put refrigerator door back on...first top then squeeze bottom on...I bet I saved over $150.00 dollars if I called a repair man for a 15 minute job...your website made the job alot easier discribing what the problem was and parts need...easy to follow....thank you

I removed the top hinge cover, loosened the hinge so I could remove the door and laid the door on it's side. I removed what was left of the Door Closing Bearing and istalled the new parts. Set the bottom of the door on the lower hinge then postioned and set the top hinge into place and tightened the top hinge and installed the hinge cap.

It was simple... After paying $280 for a repair man to come out and install some unnecessary part to the fridge when I told him "everything on the Internet points to a thermostat repair." He disagreed, fixed the fridge and said the freezer would work more efficiently now. It didn't, so I bought a new fridge/freezer, put the old one in the basement. I ordered the thermostat (under $20), put it in, and now (knock on wood), works great and I have a beer fridge for the man cave

Ordered the part online and it came the next day. No problem putting in the new bin; it took less than a minute and no tools required.

Just removed the glass and popped the plastic piece out. The new part fit perfectly. This part came overnight...awesome service, exactly right part, easy to find. Would definitely use them again.

I watched the step-by-step installation video and followed the instructions therein.

I replaced the condenser fan motor, but first I bought a brush to clean the coils. I first unplugged the fridge and took off the back panel. I located the fan motor and noticed how dusty it was back there. All the dust dirt and pet hair can accumulate making the motor work harder and overheat. I cleaned the coils with the coil brush and a shop vac. Once I cleaned it, I started to take off the three screws that held the fan motor suspended,its important that you move the fridge enough so you have adequate room to work. I unplugged the motor and finished removing the screws. When I removed the motor I was upset when I compared it to the motor I was sent because it looked physically different. The motor I removed had a plug that was integrated in the motor, but the one I received had a plug that pigtailed outside the motor. I called PartSelect and told them they sent me the wrong motor. The lady that I spoke with was very friendly and helpful, and after looking up my part # she assured me that it was the right part. Next I had to remove the fan from my old motor, the nut that held the fan on looked like a clip, but it screwed off using open pliers.I removed the fan and put it on the other motor, using the parts supplied. Before I installed the motor I screwed the three screws in and out of the three screws holes to make the screws go in easier during instalation. I installed the fan motor using the three screws supplied, and once it was secure I spun the fan with my finger, making sure the fan spun freely and installed the plug to the fan. I then plugged in the fridge to make sure the fan was working,and replaced the back panel. Hope this helps you out, good luck.

quick to repair great instuctions

Followed video instruction provided on this site.

1st my 72 year old husband has not had great success in repairing anything: electrical or plumbing. We got the part the next day. Had ordered it late one afternoon and had it the next morning in Wyoming. From the time we took it out of the box, disconnected the old one, plugged in the new one, remounted, it took less than 15 minutes. Amazing and it works great. Didn't need extra electrical connector, but tricky part on electrical connectors is to squeeze side to take apart and put back together. He used mirror to see the screws to loosen to take out and put back in ice maker. Next day our tray was full of ice. Good service/Good Product.

Easily found the parts we needed from the diagrams, Hinge bearing and door closing cam, watched the video, which was very helpful, ordered the parts from the parts list numbers...Our order came in just a few days and my husband put the parts on in about 20mins. Couldn't have done it without the help we found on your page...Thank you so much....Will be back if we have any other trouble.... Bill and Ellen Lopitz.....

A friend of our family gave us a nice refrigerator; 2 doors, has ice maker. some parts were missing but through the Parts Select I've been able to purchase online any part needed. Very easy to install and I didn't have any problems with the parts delivered. Fast service and I always get the right part without any delays of returning them. I strongly recommend Parts Select for any person who need to purchase refrigerators parts online.

Pan cover/Shelf glass gotten broken while out cleaning. Takes less than a minute to remove glass and re-insert (unless you break glass insert)