Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WHDSR316G1WW > Parts

WHDSR316G1WW General Electric Washer - Parts

All parts for the General Electric Washer WHDSR316G1WW

Below is a list of all parts for the General Electric Washer WHDSR316G1WW. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the WHDSR316G1WW
15-28 of 120
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Tub Bearing


Agitator Coupling

Bolt not included. This part connects the transmission drive shaft to the agitator base.


Hub Washer


Lid Switch with Wire Harness

This lid switch with wire harnesses is used in washing machines. The pin on the lid switch pushes onto the lever of the switch to communicate to the machine that the washer lid is closed. If your washing machine is not running when the lid is closed, not spinning, draining, or agitating, replacing the lid switch could solve the problem. The tools needed for this repair are: putty knife, 1/4 inch nut driver, wire strippers and crimpers. Refer to the manual for further installation instructions. Remember to unplug your washer from the power source as a safety precaution.


Water Pressure Switch Hose



This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide.


Fabric Softener Dispenser


D-Shaped Knob Clip

Sold individually.


Socket Rod Support - White


Triple Water Inlet Valve

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.


SCR 1/4-20 MCH HXW 5/8 S


Rod and Spring Assembly - Green

This part helps center and support the drum, transmission and motor assembly.


Suspension Rod and Spring Assembly


Inner Tub Base Hub

All Parts for the WHDSR316G1WW
15-28 of 120