WEF365BHDA Westinghouse Range - Instructions

unplugged stove;used nut driver to unscrew 2 screws and remove broken element;plugged in new element;used nut driver to replace screws. done. i used a flashlight to see better in oven. easy

I am a total non repairman. but with the video on how to I did'nt even brake the first part. ( I ordered 2 just in case)Will use you ror every part!

Initially we realized there was a problem while cooking with the large eyes and we began hearing an electrical short behind the control switch. I unplugged the power from the oven/cooktop and removed the back panel where I could visually see soot on the switches where it was shorted. Careful while choosing your part from the diagram on Partselect.com. For the model FEF336ECJ, atleast for my oven, the eye switches were reversed and I ordered the small eye's switches! Luckily they have an outstanding customer support and immediately mailed out the new parts and a label to send the wrong parts back. Changing the parts out was very simple. Pull the oven out and UNPLUG IT from any electrical outlet. Remove the back panel. Double check from the label on the front of the control panel that you are working with the correct switch, and before removing the current switch, remove the wires one by one and place them on the new part to make sure you don't misplace these wires. Once the wires are connected to the new part, pull the plastic knob off of the old switch to reveal the screws on front of the panel. Place the new switch where the old one came from and fasten the screws back in place. Replace the knob, replace the back panel(for safety) and test the new switch before you push the oven back into place. If you can turn a screw driver, move the oven, and unplug the power, this easy do it yourself repair will save you possibly hundreds by not calling a repair/handyman who would absolutely love you to pay out the nose for such an easy task.

turned off the breaker that powered the stove removed 2 screws, removed old element from 2 sleeve like parts, replaced with the new element. replaced 2 screws and done took less than 10 mins to replace!! Thanks PartSelect!!!

did just what was in the video.could not be more simple.

Replacement element was a snap to remove & replace. I used a small bolt driver with the appropiate socket. No issues.

Watched the video, turned off breaker, used a 1/4 in nut driver,had it changed in 5 minutes. Easy, the video explains it all!!

It was a piece of cake!!!!