Models
>
WA45H7000AW
WA45H7000AW ((AA-11)) Samsung Washer - Overview
Sections of the WA45H7000AW
[Viewing 6 of 6]Keep searches simple, eg. "belt" or "pump".
Washer Drain Pump Assembly
PartSelect #: PS12592631
Manufacturer #: DC97-19289F
The drain pump assembly removes water from the washer during the drain portion of the cycle.
$89.85
On Order
LEG-ADJUST;SEW-RA169N,PP
PartSelect #: PS4206427
Manufacturer #: DC61-01722B
This adjustable leg, also known as a levelling leg, is a genuine OEM part supplied by Samsung for use with washing machines. The leg supports the washing machine by ensuring that it is level and balan...
$13.97
In Stock
Water Temperature Thermistor
PartSelect #: PS4214274
Manufacturer #: DC90-10128N
The thermistor monitors and helps regulator the water temperature in the washer.
$87.25
In Stock
Washer Drain Pump
PartSelect #: PS12742622
Manufacturer #: DC31-00187A
The drain pump removes water from the washer during the drain portion of the cycle.
$184.75
In Stock
Washer Pump Coin Trap
PartSelect #: PS4276041
Manufacturer #: DC61-03385A
The pump coin trap protects the pump from damage by coins or other small objects in the drain water.
$53.68
In Stock
PULSATOR CAP;ALL USA MODEL(EXCEPT 3000J)
PartSelect #: PS11775913
Manufacturer #: DC66-00887B
This is a pulsator cap for various models of Samsung washing machines. This cap acts as a protective and preventative device for your washer by cover the securing bolt for the pulsator, also known as ...
$68.45
In Stock
Questions And Answers for WA45H7000AW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the WA45H7000AW
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Easy instal, taking off entire back panels of appliance is required
Shut off water and electrical supply to appliance, take water supply hoses off to allow for proper access to back of machine.
Take off back panels of appliance. Disconnect two hoses from pump. Take out two screws which attach pump to washer body. Detach wiring which connects pump to control unit ( that takes a little time). Install p ... Read more ump in designated location, connect hoses, connect wiring to control unit, connect appliance to powere source, test run to make sure everything works properly, make final detailed wire connection Pump to control unit, install back panels, Connect water supply hoses .....and be proud of yourself!
Take off back panels of appliance. Disconnect two hoses from pump. Take out two screws which attach pump to washer body. Detach wiring which connects pump to control unit ( that takes a little time). Install p ... Read more ump in designated location, connect hoses, connect wiring to control unit, connect appliance to powere source, test run to make sure everything works properly, make final detailed wire connection Pump to control unit, install back panels, Connect water supply hoses .....and be proud of yourself!
Read less
Parts Used:
-
Dieter from CHICAGO, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
8 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top Load washer would not drain to complete spin cycle.
Though I could hear and feel the drain pump running, the washer would not drain. This model does not have a filter for the drain pump. I lowered the discharge hose from the stand up pipe on the wall, and lowered it to the floor. Water ran right out, so no blockage in the drain system. After removing the inlet and outlet hoses to the pump,
... Read more
a quick inspection showed the impeller on the motor was off the shaft and flopping around. Bingo, motor runs but cant pump.
Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg
Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg
Read less
Parts Used:
-
Greg from Medina, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pulsator cap broke off.
The cap was easily replaced by hand and pops right in place.
Parts Used:
-
tommie from MURFREESBORO, TN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!