The water does not shut off no matter what stage the machine is cyclying
For model number WA400PJHDWR
Hello David, thank you for your question. We would recommend replacing the water valve PartSelect Number PS4220862 and the pressure sensor, which is PartSelect Number PS4217081. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
July 7, 2021
Lights come on but water doesn't enter tub or drain and no matter what you select for options (normal, rinse & spin, etc.) nothing happens. Was working fine, but when i went to check on the load, all the lights were flashing. The tub was half full with water. Hit pause and all the lights stopped flashing. Selected rinse & spin, but nothing happened. Selected several other choices and nothing happened. Door lock clicks. Any suggestions? We are on small social security and can't afford a repairman.
For model number WA40j3000aw/a2
Thank you for your question. If your washer will not fill with water, there are some parts that you will need to check to see which one is causing the issue. You will need to check water inlet valve, the door lock, the water level pressure switch, and the user control and display board. We hope this helps! Good luck with the repair!
I set washer on small water level wash it will fill but after a couple of minutes it will go to large load and start adding more water .what part do I need
For model number wa40j3000aw/aa-13
Hello Alan, thank you for your question. We have researched the model you have provided, and we would suggest the Water Level Pressure Switch, part number PS4217081. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!