TEF351EWC Tappan Range - Instructions

Removed the screws with a nut driver pulled put the element out put the new one in replaced rthe screws and presto the the was done.

removed the old one and replaced it with the new one only two wires and two scerews

my son-in- law fixed my oven for me and it still didn't heat

it was really funny. after futher investigation he found it was a 15 cent wire burnt into and not the element at all.

well,for sure i am no range tech and neither is my son-in-law,oh well if i ever need a element i sure do have. i think i will just keep it.

barbara goff

First get in touch with the sales staff at PartSelect with your stove's brand and model number to make sure the part you need is available. With my experience with Part Select I am sure they will help. Get easy payment and shipment information for the part and wait for just a few days but if you like you can have it shipped overnight...when you receive your your part first UNPLUG THE STOVE...remove oven racks to access the baking element...use nutdriver to remove nuts that hold the element to the rear of your oven...slowly take the element and pull it forward enough to disconnect the two wires that attach the element to it's power source...bend wires upward when disconnected to ensure wires do not fall back into the stove frame...take the new element that PartSelect was able to get you and attach your wires to the end of your new element...slowly feed your wires back into the frame...use your nutdriver and secure the element to the back of your stove...place oven racks back...plug the stove back in and your ready to bake whatever you desire...Thanks PartSelect

Remove the oven door. Remove two screws from rear of oven that hold the element in. Install new element, replace oven door. I was overjoyed when the element came in only 3 days. You guys are great!

looked on your web site and it suggested that 98 percent of the time a new element would fix the problem ...i ordered and in 2 days on had the element and put it the oven..all it took was a nut driver to loosen the screws and unplug each end ...took the new element and plugged to the ends of the element and presto it works fine..turn oven
up to 350degrees waited un til pre heat light went out..let it burn for 15 mins and turn off oven...been working ever since just fine..excellent shipping on parts
given on ordered from internet monday evening and oven working on wednesday evening...repair man could not have done it any faster..he may had to order part and then the service charge..reasonably priced also ...wish to thank you for the excellent service
doug havens

pull stove out from wall
unplug
remove two screws holding element [bottom]
pull out old element
insert new element
replace two screws
plug in stove
cook again!!

4 days before christmas eve, I was cooking dinner, I heard a pop and the oven was glowing. The bottom element blew, I had 10 people coming over for christmas eve dinner. I thought I was going to have to buy a new oven so I got on google and found Part Select, for under 50.00 and that was with 2 to 3 days shipping, my part came in on thursday. My husband and brother had my oven fixed around 20 mins. All I can say is Thank God for Part Select, you can not find any other place that will come through like Part Select. Thank you for saving my Christmas Dinner!!!

I was scared to do this by myself after seeing the white hot glowing element melt in the oven. I watched the instruction video on the website a few times before I ever ordered the part. I took a deep breath when I saw the box on the porch. It took me longer to find a flashlight (a working one) and a set of pliers then it took to replace the baking element. The video was helpful and incourgaged me to DIY. Thank you.

I called a few places repair. Prices ranged from 90 to 150 for parts and labor. I am not the most savy person out there, researched online for the actual part as i felt i was being overcharged. I looked at the most obvious places such as Lowes and sears, however i landed at partselect.com. i was taken back by the savings, half the price of competing sites.


In addition, the installation videos were easy to follow. My wife did not think i could do it, after about 15 minutes i was done and back in business. Saved Christmas for me as this was the year for me to host for both my immediate and extended family. Thank you very much, in the future i will definately use the site and i have recomemnded partselect to family and friends.

i removed 2 screws and unpluged 2 wires,then put new part in pluged in wires and put screws back in.

Removed two hexhead screws and disconnected two electric leads to remove the broken part. Did the reverse to install the new part. The whole job took 10 minutes. It could have not been easier.

unplugged stove, dissconeccted old element reconnected new element, plugged in stove, baked a pizza

take out 2 bottom element skrews.take off the back lower panel and disconect from Power suply...Simple and easy..Reedsport oregon.up here it is very hard to get parts in town,so I had to order and the bake element was exactly wat I needet.Thank you I am a happy camper now.

The replacement part arrived promptly , I don't know what tools my hubby used, but it took less than 10 minutes and there was no swearing involved :) The oven temp is now HIGHER so adjusted down. Thank-you,I am very pleased with Part Select