Models > SVD8310S-C > Instructions

SVD8310S-C Jenn-Air Range - Instructions

All Instructions for the SVD8310S-C
151 - 164 of 164
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
light bulb socket broken
Removed glass and then two screws to remove metal plate pulled out socket,disconnected two wires and installed new socket.
Parts Used:
Light Bulb Socket
  • Blanche from Woonsocket, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
grease filter had holes
throw the old one in the garbage, drop in the new one. It is about 3/4" narrower than the one that came with the stove but still covers the down vent adequately
Parts Used:
Grease Filter
  • Lavonne from Hutchinson, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken cooktop knob
Just slipped the new knob on with no problem. Very easy.
Parts Used:
Gas Valve Knob
  • Christine from Jefferson, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replacing old parts
wanted a fresh clean look on the burners since they were old and getting dirty and blackened from use. Easy to replace with new one.
Parts Used:
Front Burner Assembly - Black (Glossy Finish)
  • Debra from Carlstadt, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Range burner melted plastic jar and became clogged
Found the part number on an old box, ordered the part and it arrived next day. Installed easily and is working perfectly.
Parts Used:
Front Burner Assembly - Black (Glossy Finish)
  • Harry from Cambria, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Light bulb failure
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Parts Used:
Light Bulb - 40W
  • Grant from Alexandria, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
old burners wouldn't light
took old burners out, installed new ones . I was very easy and if i could do it anyone can. I used a rachet and thats the only tool i needed
Parts Used:
Front Burner Assembly - Black (Glossy Finish) Rear Burner
  • BOB from hartford, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Replaced worn seal
Remove the door. Place small screwdriver in each door arm to prevent extraction. Remove approx 20 screws. Remove the seal. Replace the new seal. you will need help in holding the seal in place until you car install at least two screws. Very straight forward. Took 20 minutes. Even a cave man can do it.
Parts Used:
Oven Door Seal
  • Horace from Las Vegas, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
very old grease filter.
Very easy to replace the filter, nothing to it, take out the old filter and put in the new filter.
Parts Used:
Grease Filter
  • Eliane from Potomac Falls, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Simply replace the grease filter
Thanks for carrying this part for my old stove. And thanks for the great service.
Parts Used:
Grease Filter
  • MaryAnn from Scituate, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door seal was worn out/burned /leaking heat
Took the oven door off hinge. Took door apart pulled off old seal from inside of the inside panel of door. Replaced with new seal.
Parts Used:
Oven Door Seal
  • Christopher from Toledo, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Frozen screws
Followed instructions. Two screws frozen. Unable to loosen. Forced to grind heads off and replace with new screws.
Parts Used:
Oven Door Seal
  • Jack from Lake Wells, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Filter element missing screen material from age and cleaning
Lifter grill and replaced filter. It fit perfectly.
Parts Used:
Grease Filter
  • Harry from Bedford, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old and stained
The repair was extremely easy. My stove still worked but looked awful. By changing out these parts it makes it look brand new.Thank you.
Parts Used:
Rear Burner Front Burner Assembly - Black (Glossy Finish) Burner Bracket - Black
  • Susan from South Lake Tahoe, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the SVD8310S-C
151 - 164 of 164
Back to Top