SVD48600PK Jenn-Air Range - Instructions

It was an easy repair after my husband figured out how the door lifted out.

The repair was very easy. I took off the protective covering, the electrical wiring and disconnected the wire to the oven element. Then pulled out the element and put in the new one, put the protective covering back and plugged in the electrical outlet and was finished. The time that I received the new element from the parts store was lest than four days super time and repair thank you.

I went to the source of power on the stove and noticed one of the terminals had come loose from the terminal block and had shorted out against the cover of the terminal junction. After prying the loose terminal off cover I ordered new terminal block and received it the 2nd day. I removed the old terminal block and replaced the part in about 10 minutes..Thank you Parts Select for your easy to find diagrams and quick delivery.

After carefully unhinging the door (by removing the plates on the oven itself it snaps forcefully, so be careful) it becomes obvious how to remove the door to get to the glass. My BIGGEST obstacle was putting everything BACK! If I was smarter, I would have noted the order and way I removed everything. It really wasn't that difficult.

Just slipped the new knob on with no problem. Very easy.

I unscrewed the two screws holding the element to the back of the oven. Pulled slowly until the wires appeared. Disconnected the females from males on element. Went to the computer pulled up PartSelect compared pictures and measurements with mine. Ordered the part. Received it in 3 days (thank you) and installed it in 5 minutes before I left for work the following morning. Thank you very much. This was the easiest repair I've completed and I owe it to you. Thank you!!! Christian J. Russo

Got a bent metal coathook to temporarily release the oven door, removed the screws from the old probe, inserted the new one, and hooked it up, using the one of the plug adapters provided. Problem solved! The oven door latch was now disengaged, the oven would now accept temperature inputs, and the rear cooling fan (which wouldn't shut off) now turned off. That's a lot of things working better for less than $50!

very carefully, as not to damage the old and new glasses.

Ordered a new heating element (bottom element). Got it the next day. Turned off breaker for the range. Unscrewed the two screws holding the element in. Pulled the element out. Disconneced the two wires the two wires attached to the element. Attached the new element to the two wires. stuffed in the hole. Attached thetwo screws to the back and I'm done. Don't forget to turn the breaker.

Replaced the old part--simple!

wanted a fresh clean look on the burners since they were old and getting dirty and blackened from use. Easy to replace with new one.

Found the part number on an old box, ordered the part and it arrived next day. Installed easily and is working perfectly.

Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.

Watched the video and things went exactly as planned. Love this website will use them again when I need a repair.

took old burners out, installed new ones . I was very easy and if i could do it anyone can. I used a rachet and thats the only tool i needed