One of the cabinet hold down brackets broke on Bosch dishwasher
I have granite countertops and one of the hold down brackets broke to wood cabinet side mount. Easy and fast repair to remove old brackets, pull out dishwasher, and I replaced both brackets with new, and new wood screws. New installation looks better than original done 18 years ago. Very easy to do and saved a lot of money if I had an appliance repair company do it.
Water was leaking into the dishwasher when it was not running and leaking onto the floor
Disconnected the water and power, pulled dishwasher out from under the counter, unscrewed the old inlet valve, disconnected hose from exit of inlet valve, noted the placement of the wires and disconnected them. Installed new inlet valve in reverse order and reinstalled dishwasher.
Getting to the part at the bottom of the dishwasher was a little pain.
Everything went great installing the new drain pump. Our dishwasher works like it’s brand new again. I would recommend part select to anyone that needs to repair their dishwasher parts or any applications parts.
Small child messed with keyboard during order process. Wrong part was ordered by mistake. Cancelled online order immediately as instructed online at Part Select. Those idiots still sent the wrong part anyway and I had to return repair part at my expense. These people don't bother to follow their on rules. Never would I order a repair part from these people again. I would rather just buy a new machine than use Part Select.
shut off water, pull dishwasher out, took side insulation off, unhooked what was connected to the float switch and replaced the new with the old. Reconnected everything and put insulation back and wa-la , all done
Electronics facia had broken pieces from opening the dishwasher
I removed the old electronic facia. You will need to remove the front bottom panel to get to the bottom screws that attach the facia. Be careful there are some sharp edges. After removing the bottom 2 screws you will need find 2 clips at the bottom sides of the facia. When the clips are free pull the bottom out first then lift up. You will need to transfer the buttons from the old unit. Lift those all the way up gently and they should come out easily. It would probably be a good idea to first number the buttons to ease them going back on. You don’t need to take this step as long as you notice the buttons on the right have different lengths in back due to the curvature of the facia. Reverse the process to reattach.
Remove lower panel TURN OFF POWER AT BREAKER Remove water line Remove the screws on bottom left of washer to remove solenoid valve Pull out solenoid valve carefully there is a wire plugged into it, far enough to remove clamp on the hose Remove valve far enough to disconnect wire Order correct valve assembly Reinstall in reverse order