Models > RY34420 > Instructions

RY34420 Ryobi Trimmer - Instructions

All Instructions for the RY34420
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The new boom had to be modified where it would work.
Once I was able to see the problem. I had to make modifications so it could be used. It took awhile to figure out the problems. With a drill motor and metal bit I was able to get the boom where I could use it.
Parts Used:
Upper Boom Assembly.
  • TFRANKLIN from MICANOPY, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper shaft was bent
Watch a video, great instructions:
Parts Used:
Upper Boom Assembly.
  • Nathan from Fayetteville, AR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RY34420
1 - 2 of 2
Back to Top