Models
>
RY34420
RY34420 Ryobi Trimmer - Overview
Sections of the RY34420
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Spool Retainer - Black
PartSelect #: PS9937839
Manufacturer #: 308042002
This spool retainer is sourced from the equipment manufacturer for use in trimmers. It is a plastic knob, measuring 2 inches in diameter, with a threaded metal bolt in the center. The retainer has a r...
No Longer Available
Grass Deflector Assembly
PartSelect #: PS10051753
Manufacturer #: T308744001
This grass deflector acts like a shield so that grass clippings are directed away from you and the surrounding areas while you are operating your trimmer. It is often located near the bottom of your t...
$3.99
In Stock
Spring & Container
PartSelect #: PS9987666
Manufacturer #: 638033001
This OEM spring, also known as a recoil or rewind spring, is housed in a container and is used to retract the starter rope on various lawn equipment models. Over time and through use, the spring will ...
$4.99
Special Order
Questions And Answers for RY34420
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The new boom had to be modified where it would work.
Once I was able to see the problem. I had to make modifications so it could be used. It took awhile to figure out the problems. With a drill motor and metal bit I was able to get the boom where I could use it.
Parts Used:
-
TFRANKLIN from MICANOPY, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper shaft was bent
-
Nathan from Fayetteville, AR
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!