Models > RY15526 > Instructions

RY15526 Ryobi Trimmer - Instructions

All Instructions for the RY15526
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Noise and wobbles during spin cycle.
Ordered the hub repair kit. I had much difficulty removing the agitator. It was stuck. Running the strap under it and tapping on the agitator assembly should've caused it to pop up but didn't. I had to ultimately strike it hard with a metal hammer. That released it but caused a hole in the agitator. The center metal gear on the agitator was very worn and rusty. I decided to also replace the agitator. I saved about $300 on the repair.
Parts Used:
Line Cut-Off Blade
  • William from SPANISH FORT, AL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
3 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Damage to trimmer housing
Looked online for repair procedures.
Easy replacement
Parts Used:
Bump Feed Trimmer Head Assembly (Inc. Key No. 21)
  • Robert from Lake Ariel, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RY15526
1 - 2 of 2
Back to Top