RT21AKXKQ03 Roper Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Refrigerator was turning off intermittently
Removed temperature knob, removed one screw and removed cover plate. Removed old thermostat (3 electrical connections), removed plastic sleeve from old thermostat and placed on new thermostat, and installed new thermostat. Easy access at the front of the refrigerator so only took 15 minutes to remove and replace. Only small issue was bending the sensor sufficiently to fit into slot of the cover and thru pinch points while placing the thermostat.
Parts Used:
-
Loren from Woodstock, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The wire harness plug was male .Same as the plug on the refrigerator
I cut the plugs off and bought male and female wire conectors and crimped them on the wires and pluged them together.
Parts Used:
-
Christine from Burnsville, WV
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!