Models > RT14ZKYFN02 > Instructions

RT14ZKYFN02 Roper Refrigerator - Instructions

All Instructions for the RT14ZKYFN02
136 - 137 of 137
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
stoped making ice
took out the old fill tube installed the new one and its working great. I really did not think that was going to be the problem thought it would be more than that but it was not. It took about 7min to change thanks for the fast shipping I will use you in the future.
Parts Used:
Ice Maker Water Fill Tube Kit
  • Joseph from rolling meadows, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Evaporator coil icing
Verified the defrost time and heating element were good and ordered parts. Parts were delivered way before I thought they would!! thank you PartSelect!! Had inside of freezer already apart, it takes a 5/8 driver to remove the three screws that hold the bottom plate and back cover. Then it's 2 clips that hold the front of the bottom plate, I used a small flat bladed screw driver to pull those up. The harness has several plugs and every thing is color coded (very easy to match which plug goes where). Un-clipped temp switch and plugged harness back in, re-assembled in side of freezer and plugged it back in, easy as can be.
Parts Used:
Defrost Thermostat with Wiring Harness
  • Kriss from Valencia, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RT14ZKYFN02
136 - 137 of 137