RER305CW2 Kelvinator Range - Instructions

We recently purchased condo and WhiteWestinghouse range needed some love. the old racks were not in very good shape so we ordered new.

remove old replace new

I just watched the video, unplugged the stove, attached the burner and started baking again. DSC

1. Remove two screws securing element to rear wall of oven. 2. Carefully pull element forward until you have access to the wires attached to the element. 3. Carefully pull the push-on connectors from the element. 4. Push wires onto new element. 5. Carefully push element back into oven wall and secure with screws.

It was too simple. I unplugged the oven. Unscrewed the old element. Disconnected the wire plugs from the element. Plugged the new element in to the two wires and screwed the new element in to the back of the oven. DONE! There are several Youtube videos that document this process if you want the visuals.

Removed the old element by removing two screws and pulling the ends through the back wall. Removed the wires simply by unplugging them. Plugged wires into new element, put back through back wall and secured with 2 screws.

The appliance repair service had never heard of this old brand, but I was able to order this and have it shipped at a more economical price than any other appliance parts service. All the repair service had to do was to walk in and install.

Required taking back of stove off to properly extend the wires to plug in the new element as well as crimping existing plugs to obtain a secure contection.

I followed instructions on the partselect website. I've never fixed any appliance before, but the directions were very simple and the oven was running again in less than ten minutes.

I could not find the larger size universal drip bowl to fit the 8" burners on my stove. This product replacement is perfect.

For the burner, I followed the simple instructions that came with the new burner(there is a video as well on this website). Cut the wire, stripped the ends off. The cereamic wire nuts were very easy to put on. That was pretty much it for the burner. Replacing the oven element was even easier. Two small screws, pull the element out about 3 inches, unhooked the two contact points and put the new one in. Voila, stove and top burner work like they used to. On a side note, the shipping was extremely fast. Ordered my parts on a Wed and they were at my doorstep on Thurs. NY to ME in 24hrs.

used the pliers to remove the screws, gently pulled back the element exposed the wires gently pulled the clamps of the element, removed the element. put the clamps back on the new element, put the element back in the holes and put the screws back in.

Ordered the element from partselect. got the part fast. 2 days. removed the old element 2 screw and 2 wires.installed new one in reverse order. total of 10 minutes and oven is working like new. thanks partselect

I went to all of the do-it yourself stores and spent a bunch of money on aftermarket drip pans only to find out that none of them fit. I came up on your website and also called customer service. The found the right part and mailed it too me. They fit perfectly. No more burnt and rusty drip pans. I know where to go for parts now.

After two failed attempts to get the 'correct' drip pans for my range from two other supply outlets, Part Select had the proper drip pans for this model. They fit perfectly! Simple installation and threw away those cheap, poorly fitting replacement pans I've put up with for three years! Thanks Part Select for having the correct parts!!