RER305CW0 Kelvinator Range - Instructions

remove old replace new

I just watched the video, unplugged the stove, attached the burner and started baking again. DSC

1. Remove two screws securing element to rear wall of oven. 2. Carefully pull element forward until you have access to the wires attached to the element. 3. Carefully pull the push-on connectors from the element. 4. Push wires onto new element. 5. Carefully push element back into oven wall and secure with screws.

It was too simple. I unplugged the oven. Unscrewed the old element. Disconnected the wire plugs from the element. Plugged the new element in to the two wires and screwed the new element in to the back of the oven. DONE! There are several Youtube videos that document this process if you want the visuals.

Removed the old element by removing two screws and pulling the ends through the back wall. Removed the wires simply by unplugging them. Plugged wires into new element, put back through back wall and secured with 2 screws.

The appliance repair service had never heard of this old brand, but I was able to order this and have it shipped at a more economical price than any other appliance parts service. All the repair service had to do was to walk in and install.

Required taking back of stove off to properly extend the wires to plug in the new element as well as crimping existing plugs to obtain a secure contection.

Took the back off the range to remove terminals from the element then unscrewed the two screws holding the element on from the inside of the oven. Installed the new element, put terminals on element and reinstalled the back of the range.

Unscrewed and unplugged old element, then put new one in it's place. Quick delivery and satisfied with DIY job.

Received the order the next day. Unpluged the stove from electricity. Used a 1/4 craftsman wrench to undue the screws. Pulled the old one out and disconnected the conection. Reconnected the new one. Pushed back in place, then re-tightened the screws. Thanks for having it in stock.

The hardest part of the job was cleaning under the old rings. Cook top looks new again!

Very simply following the online video instructions.

Took the old element out in order to order a new one and found that the ends of the wire connectors were almost burned in two. Ordered the new element online and while waiting for it to be delivered, I went to the hardware and bought new ends for the wires and replaced them. Then when I received the new element it took about 10 minutes to finish the repair. We discovered the element burned out on Monday evening, ordered the part and installed it on Wednesday afternoon. It took less than 48 hours from the time I ordered the part until my wife was baking again.

unplugged the elements, removed drip pans, replaced with new drip pans. plugged back in elements. took no skills or effort. the parts were ordered on-line one afternoon and were on my doorstep the next morning. I had been unable to find drip pans that fit my stove and was thrilled that they fit and came so quickly and were reasonably priced.

It was just replacing the element no tools were required.