Models > NTW4605EW0 > Symptoms > Spins slowly

Parts That Fix Amana Washer NTW4605EW0 Spins slowly

Spins slowly is a commonly reported symptom for the NTW4605EW0 Amana Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your NTW4605EW0 Amana Washer that will fix Spins slowly. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Drive Belt
Fixes Symptom 53% of time
Drive Belt – Part Number: WPW10006384
★★★★★
★★★★★
20 Reviews

Rated by 13 customers 

  

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.   

The main drive belt is designed to ride on the pulley until the basket gets up to speed.

$ 19.71
  In Stock
PartSelect Number PS11747978
Manufacturer Part Number WPW10006384

Replacing your Whirlpool Washer Drive Belt

Replacing your Drive Belt

Customer Repair Stories

washer wasn't spinning after rinsing but the motor was running

I had taken the time to watch videos of this repair so when the switch arrived I knew what I had to do. Removing the screws to get the back cover off was simple as was installing the switch. No tricks here just watch the videos and your all set to do the job
  • Terry from HANCOCK, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Smelled a burning odor occasionally

First, I checked the belt before ordering and then decided to order the belt, capacitor, and clutch assembly (if I needed to replace). I replaced the belt noticing the older belt came right off and new one was tighter going on. I replaced the capacitor since I had it handy and it can be known to cause this smell also. After setting washer back up and started a cycle I noticed the spin cycle would not start properly so I thought maybe the capacitor (new one) was faulty or just not the exact match even though it was said to be. I replaced my older capacitor back on and again ran cycle and it ran great. Thus I decided to send the parts which were not used. I would recommend this site as I have used them in the past before on other items. They ship fast and have a great return policy if parts not used.
Read less
  • Paul from E NORTHPORT, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set, Wrench (Adjustable)
16 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 Washer Drive Pulley
Fixes Symptom 32% of time
Washer Drive Pulley – Part Number: W10721967
★★★★★
★★★★★
21 Reviews

Rated by 15 customers 

  

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.   

This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise, or if you are having problems with the wash and spin cycles. You will need to access the bottom of the washer for this repair. It is easiest to if you disconnect your washer from both the water and power source, and lay it on its back. The clutch assembly contains 6 parts, and all are included with the kit. It is also important to change out the entire assembly, rather than individual pieces.

$ 54.38
  In Stock
PartSelect Number PS10057144
Manufacturer Part Number W10721967

Replacing your Whirlpool Washer Washer Drive Pulley

Replacing your Washer Drive Pulley

Customer Repair Stories

Making loud noises.

The video you sent me was very helpful told me the exact tools I needed and how to do it.
Thank you
  • Roy from BROOKLYN, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.

Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
  • David from BLOOMINGTON, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
35 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
3 Shift Actuator - 6 Pin
Fixes Symptom 15% of time
Shift Actuator - 6 Pin – Part Number: W10913953
★★★★★
★★★★★
11 Reviews

Rated by 7 customers 

  

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.   

$ 66.26
  In Stock
PartSelect Number PS11769864
Manufacturer Part Number W10913953

Replacing your Whirlpool Washer Shift Actuator - 6 Pin

Replacing your Shift Actuator - 6 Pin
Back to Top