Models > NBXR463EB1WW > Instructions

NBXR463EB1WW Hotpoint Dryer - Instructions

All Instructions for the NBXR463EB1WW
406 - 416 of 416
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken door handle
removed the old broken handle, and snapped the new one in place, total time; 10 seconds.
Parts Used:
Door Handle - White
  • Paul from Mattydale, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
handle on dryer broke off
Snapped on the new on the new one. all done
Parts Used:
Door Handle - White
  • Diane from Torrington, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
front air duct assembly broken @ lint filter
The repair went just as the self help video showed on your web site. Since I was replacing front air duct assembly, and had unit disassembled I figured on replacing upper portion, bearing slides (as recommended) and lint basket. Now it as good as new. Thanks for the help!
Parts Used:
Lint Filter - White Frame Front Drum Bearing Dryer Lint Chute Assembly
  • J.R. from HAZEL GREEN, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The plastic grid behind the lint filter started cracking with pieces breaking off. This caused delicate clothes to get tangled and twirled on the broken pieces.
I watched the installation video a of couple of times and followed the instructions. Two screws under the dryer door then the top comes off. Then two screws hold the front on come out. Unplugged the two wires to the switch. Removed the duct assembly. Cleaned up the door and snapped in the new duct assembly. Re-installed the door and then the top. Everything was easy - just like in the video.
Parts Used:
Dryer Lint Chute Assembly
  • Gilbert from Torrance, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Noise while drum is rolling and at start up
Reviewed problems with the dryer on line and ordered the parts. The only problem is that it takes two types of slide bearings which I did not order correctly. The video was great and had no problem installing the parts.
Parts Used:
Drive Belt Front Drum Bearing Drum Bearing Slide - White (Sold individually)
  • Glenn from Prairieville, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
heating element had broke connection
when dryer was taken apart it was discovered the belt and the skides needed to be replaced as well. The parts arrived however, I did not know only 1 glide was ordered and sent. It was assumed they would have come with as many you needed; did not realize they were charged indivdually. The repair was pretty much easy. The dryer is now heating correctly and this has been the first repacement of parts I've had to do in the amount of time of I've had the dryer. Parts Select had everything I needed and it was shipped in a timely manner. I was very pleased.
Parts Used:
Drive Belt Drum Bearing Slide - White (Sold individually) Rear Drum Bearing Kit Heating Element and Housing
  • Kristin from Glenwood Springs, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Replaced lint filter
The actual repair was simple, however, I initially ordered the wrong part. The exchange to the correct part was very easy and delivery was quite quick. I will use Part Select in the future when ordering a part for a simple repair.
Parts Used:
Lint Filter - White Frame
  • William from Horsham, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
knob missing after accident
Dryer blew out of pickup, rolled down highway like a basketball, down an 8 foot grader ditch. Rolled it out of ditch, found two knobs not the third. Put side back on dryer, did some cosmetic work and it seems to work fine. One tough little machine. Slid handle on.
Parts Used:
Knob and Clip
  • phillis from Smithfield, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dryer door handle broke
new handle just popped right in the slots
Parts Used:
Door Handle - White
  • Pam from Thayer, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Holes were not threaded on rear bearing kit
Had to tap three holes in the rear bearing to match the three attachment screws. Screw up with the part.
Parts Used:
Rear Drum Bearing Kit
  • Dennis G from Naples, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
clip on door broke
it was easy, it clip right on.needed to give it a little tap to get it in .
Parts Used:
Door Strike
  • edward from early branch, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the NBXR463EB1WW
406 - 416 of 416
Back to Top