This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
This water filter is a genuine replacement for bottom-freezer refrigerators that accept a Filter 2. it is certified to remove up to 24 different contaminants which include pharmaceuticals, waterborne ...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your prod...
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help s...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ic...
This ice container, also known as an ice bucket or ice bin, is an authentic OEM part that is designed to fit with refrigerators. It consists of a white base attached to a transparent plastic dish with...
This OEM, 120V, 60 HZ water inlet valve is specially designed for refrigerators. It is responsible for regulating the flow of water into the water dispenser and ice maker of the fridge. If your refrig...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
February 8, 2020
The dispenser is locked and we can’t get it unlocked?
For model number MFT2776DEM00
Hello Tom,
Thank you for your question. Hold the light button for 3 seconds to lock or unlock the dispenser, and if that does not work, the control board under part PS12345989 would need to be replaced. We hope this helps.
Can you please tell me what is causing the water buildup (and is turning into ice) on the plate surface below the ice bucket and what do I need to replace?
For model number MFT2776DEM00
Hello Flo, Thank you for the question. We suggest checking the Ice Maker to make sure it is not over filling and causing water to leak. We also suggest getting a thermometer to check the internal temperature in the freezer. Make sure there are no cracks or damage to the Ice Bucket its self. We hope this helps!
Bottom duel evaporator fan won’t work. I replaced with new one and still won’t work.
For model number MFT2776DEM00
Hi Dana, thank you for your inquiry. If the evaporator fan is not working, try rotating it by hand first. If it rotates, the fan motor, part number PS11755853, is most likely faulty and may need to be replaced. If it does not, the fan is most probably damaged or obstructed, and the fan blade, part number PS11743683, may need to be replaced. Before replacing any of the parts, make sure you have properly installed the replaced evaporator fan. We hope this sorts out your problem!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy.
... Read more called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.