MDBH975AWB Maytag Dishwasher - Instructions

Removed the 11 torq head screw from inside the door panel, separate the inner and outer door panels, remove the 2 screws holding the black elect box disconnect the wiring from the latch assembly,remove the 4 screws holding the upper and lower outer panel together,remove the broken upper panel, reverse this procedure and reassemble, Need a torq screw driver and a 1/4 inch nut driver. Now wash your dishes Thanks

removed door liner and removed and replaced the electronic control board. reinstalled door liner and reconnected electrical power by closing the circuit breaker. Started the dishwasher and ran it through a normal wash cycle to flush out and clean the dishwasher. All operations were normal. Piece of cake repair thanks to your troubleshooting guide. Thanks for including the tech data with the replacement control board. Lawrence Faison

First off, I'm really glad I found this web site. I watched the video on how to change a broken handle and felt confident I could do it before I ordered the part. The handle came completely assembled and was honestly quite easy to replace. My door has six sided screw heads so had to find a screwdriver that would work then took about 2 min to unscrew the inside of the door. I then used a little tupperware qt containor to prop the door open while I used a pair of pliers to unplug the electric plugs...they were the hardest thing I had to do to fix my handle. Those things are really hard to get off but after I unhooked them the handle assembly just popped right in, I conneted the plugs back, screwed the back of the door back and wa-la it worked just perfectly! Only took 10 or 15 min...but the video was a great help. I would recommend using their products anytime and will come back to this site if/when I need appliance repair help again. THANK YOU!!