Models > LW8312W2 > Instructions

LW8312W2 Amana Washer - Instructions

All Instructions for the LW8312W2
136 - 137 of 137
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer would not come on
When the dryer stopped working, I checked the two switches to see if they were good. The start button checked out OK but the switch on the door read bad. Ordered the part with the part number and put on when it arrived. Just a matter of disconnecting and reconnecting three wires. Very simple
Parts Used:
Door Switch Kit
  • Newt from Daphne, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Leaking water
detached 2 inlet/ oulet hose/ hose clamps.removed the 4 motor/ pump base screws, tilted motor/ pump assembly and pulled from washer. Removed the 3 pump housing screws, removed pump/ old drive belt. installed new drive belt, pump, reattached pump screws, motor/ pump base screws, reattached hose/ hose clamp. Rreplacement of parts took approxmiatley 30 minutes.
Parts Used:
V-Style Drive Belt (32.5 inches long) Drain Pump
  • William from St.Bonifacius, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the LW8312W2
136 - 137 of 137
Back to Top