Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDM01TJBL0 > Parts

KUDM01TJBL0 KitchenAid Dishwasher - Parts

All parts for the KitchenAid Dishwasher KUDM01TJBL0

Below is a list of all parts for the KitchenAid Dishwasher KUDM01TJBL0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUDM01TJBL0
15-28 of 178
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$39.62

Water Inlet Valve

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve will open and close according to t...

$7.00

Spray Arm Seal

This seal is located between the spray arm and the water feed tube.

$3.42

Spray Arm Seal

Also known as a wash arm seal.

$17.63

High Limit Thermostat

This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.

$15.24

Door Spring

This dishwasher door spring is sold individually. It is recommended if you are replacing one side, to replace both.

$38.98

Seal

This is a seal, but you may also know it as a door gasket and it is for your dishwasher. The seal forms a watertight barrier between the door and the dishwasher tub, deterring water from escaping during a wash cycle. If your dishwasher is leaking you will need to replace the seal, as it is likely damaged. The first step should be to check the seal for buildup of food particles near the sides and the bottom of your appliance.

$6.13

Upper Wheel Gasket

Sold individually.

$4.88

Screw

Sold individually.

$33.92

Door Latch Bracket Kit - NO Handle

Handle is not included with this part.

$2.96

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

$4.88

Screw

Sold individually.

$2.96

Cover Screw

Sold individually.

$104.18

Circulation Pump and Motor Assembly

*** This part no longer includes the Chopper Assembly as per the Manufacturer *** The part functions by spinning the impeller of the circulation pump, which is used to move the wat...

$2.96

Screw - 8-18 x 5/8

Sold individually.

All Parts for the KUDM01TJBL0
15-28 of 178