KUDE70FVSS3 KitchenAid Dishwasher - Instructions

followed instructions in pkg.

Quick and easy repair--less than a minute for each row. The replacement tines are a finer gauge than the originals but fit the space well.

I viewed the online video where the installation procedures were presented. Removal of the dishwasher from the counter was very easy since it was retained in place by two small screws attaching the top of the appliance to the underside of the counter. The appliance could then be pulled out into the kitchen sufficently to reach the springs on the lower sides. A thermal insulation blanket covered the appliance and had to be lifted to work on the lower side of the dishwasher. One spring was adrift beneath the appliance and its detachment was the loud SNAP that I heard. The spring was easily recovered and reattached to the rear of the appliance and then then working one side at a time I first removed the old parts and reinstalled the door balance link to replace the broken cord. I then changed out the other side to complete the job.

Pulled the old seal out and inserted the new one. Very simple and fast. Dishwasher no longer leaks.

Real easy there was no guess work after watching your video on how to change the door balance kit. Having that video on the same page that I ordered the part was a great Idea. The guy that thought of that should get a Raise.

I followed the on line video instructions and the repair was completed with a hitch. The seal did not display the 'white stripe', but the enclosed illustration cleared up any question I had about proper insertion. The part arrived within 24 hrs of shipment! I will use Parts Select exclusively in the future! No more big bucks to have a Sears guy simply plug in a new part.

Repair was very easy...Thank goodness for the viedo...The part came the next day...I would recomend looping the link first...then attaching it to the spring.....

turned off h20 disconnect h20 and drain. pulled out dish washer took new part installed. Put back together in opposite order. then ran it to make sure I had no leaks. put cover back on and made kids do the dishes. really easy!

Excellent, Very easy to repair and the video showed me how to do-it-myself.Thank you

I ordered a repair kit and replaced the cord linkage without any tools other than those to pull the bottom panel and screws from the top retainer clips. Great instructions and extremely easy repair myself. Thank you.

I looked on your website under our model number. There I found various descriptions for the problem I had. Under the problem column, I found the possible parts needed. Turns out I needed new door pulleys and ropes. We watched the video provided by your site,pulled out the dishwasher, and changed out the ropes and wheel assemblys. Squeak is gone, door is balanced. Mission accomplished!

The hardest part was pulling the dishwasher out for the repair. I had to disconnect the water line to get the 2 feet required. Replacing the part took minutes. The springs were hard to extend in the limited space so I used pliers to pull them.