All Installation Instructions for KitchenAid Refrigerator KTRS25KDWH01

Broken roller wheels

Followed the instructions on package, went extremely well, with no problems what so ever! Thanks so much for the part and how to do list!

Parts Used:

Refrigerator Front Roller Kit

Joseph from Tyrone, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

Was this instruction helpful to you?

Thank you for voting!

Fan motor worn out

My Son who is not an appliance repairman did it for me. He had some difficulty getting the nuts and bolts loose mainly. Sorry I'm not much help other than that! I would like to compliment you on your fast service, first time ordering from you and it was for an older model refrigerator that my repairman said he couldn't find. It's working fine now and I'm a satisfied customer!

Parts Used:

Condenser Fan Motor Kit

Myrna from Decatur, IL
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours

Was this instruction helpful to you?

Thank you for voting!

The fan in the freezer was squealing

Took the old fan out and put the new fan in.

Parts Used:

Evaporator Fan Motor Kit

Maxine from Henderson, NV
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

condenser motor broke

opened box,read directions,took out bad motor,installed new one.PRESTO CHANGO way to go.

Parts Used:

Condenser Fan Motor Kit

patrick from livonia, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

wouldn't make ice, door seal was hot to touch, warm in fridge.

I folded in half twice! and took the back off the fridge(cardboard) and took one brace off and just took the screws off the fan from the other two braces. Turned the fan enough to get at the wires for the fan and cut them off an inch from the old fan, stripped the insulation and wire nutted them to new fan. Make sure they don't interfere with the new fan and put the new fan in place put the screws in and we're making ice and cold fridge again.

Parts Used:

Condenser Fan Motor Kit

Dale from Sterling, AK
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Socket set

Was this instruction helpful to you?

Thank you for voting!

One front and one rear fell apart upon moving refridgerator.

The fix was easy. I jacked up the unit and put on blocks. I used socket and ratchet removed the wheels. Reinstall new ones and let off the blocks.

Parts Used:

Rear Roller

Refrigerator Front Roller Kit

paul from colchester, CT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set

Was this instruction helpful to you?

Thank you for voting!

intermittent loud whirring noise

Moved fridge out from wall, unplugged power cord. Laid on floor, removed 6 screws from cover. Removed one threaded bolt to allow assembly to slide out. Removed special nut, and took fan off. Removed 3 motor mounting bolts. Unscrewed 2 wire nuts, and untwisted wires. (option 1, no ground) Vacuumed entire area around motor. Used 3 bolts to mount motor to holder assembly, and special nut to install fan. Stripped wires back about 3/4 inch. Twisted two wires together CW, and installed new wire nuts. Slid motor assembly back into slot,(keep wires away from blades) and used one threaded bolt to secure assembly. Reinstalled cover plate with 6 screws. Plugged power cord in to test air flow (out through cover vents). Moved fridge back into place. The loud whirring noise did not stop for a day; then quiet!

Parts Used:

Condenser Fan Motor Kit