KSSS36QMW01 KitchenAid Refrigerator - Parts

Water Fill Cup and Bearing

★★★★★

★★★★★

(10)

This refrigerator ice maker fill cup dispenses the water into the ice cube mold during the fill cycle. Replacing the water fill cup is a possible solution if you notice that the ice maker is leaking, ... Add to cart

Water Tube Kit

★★★★★

★★★★★

(7)

This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may... Add to cart

Screw

★★★★★

★★★★★

(1)

Metallic screw that is less than an inch long. Does not include the plastic washer. Add to cart

Ice Auger Motor Shaft

★★★★★

★★★★★

(18)

This part is the drive shaft for the auger. Add to cart

Ice Dispenser Door Chute

★★★★★

★★★★★

(7)

*Please note, this door chute is no longer being manufactured with a heater. Add to cart

Seal

★★★★★

★★★★★

(4)

This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ic... Add to cart

Evaporator Fan Blade

★★★★★

★★★★★

(4)

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate... Add to cart

Flipper

★★★★★

★★★★★

(10)

This part is a replacement flipper or emitter cover for your refrigerator. It is made of white plastic and is approximately 3 inches by 2 inches. The flipper shields the emitter control board and hous... Add to cart

Overflow Grille - White

★★★★★

★★★★★

(13)

This is a genuine Whirlpool dispenser overflow grille for your refrigerator. This part is made of plastic and snaps in under the water and ice dispensers on your refrigerator door. Its function is to ... Add to cart

Levers Retainer/Clip

★★★★★

★★★★★

(6)

This part is the replacement dispenser lever retainer for your refrigerator. It is made of metal and is approximately 2 inches long and ½ an inch wide. The bottom half of the dispenser lever retainer ... Add to cart

Single Shelf Stud

★★★★★

★★★★★

(1)

This part screws into the side of the wall in your fresh food compartment and supports a shelf. Add to cart

Cycling thermostat

★★★★★

★★★★★

(1)

The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine when to release the ic... Add to cart