KSB5WH4 KitchenAid Blender - Instructions

It did not appear to be a part that could be replaced. After I looked up the part on Part Select and watched the video I was able to get the part and repair it within three days. Thanks PartSelect.

Just followed instructions that came with part. My husband had is fixed in no time. Thank you for having what we needed.

The instructions said to remove the old coupling but there was not much room for a wrench to fit between the old coupling and the blender case. Fortunately I have a set of very slim 1/4 inch hex wrenches which fit the shaft attached to the drive coupling. I was able to unscrew the old coupling and the new coupling then easily screwed onto the shaft to complete the repair.

I would have never figured out how to remove old drive coupling without your on-line video. Using a screw driver to pry it off as discribed the part basically came off the drive shaft without damaging the drive shaft threads.PERFECT, then the new coupling screwed on with ease and the blender was good as new! You even sent a hardcopy of repair instructions with the order, I am impressed with your services, my first time ordering, will not be the last!THANKYOU , Dale

I viewed the video,and done what it said to do. Could not have been any easier.

Just follow instructions that came with part.

I ordered the part on line and watched the instructional video. The drive coupling came in two days with explicit instructions that were very easy to follow. My handy dandy screwdriver and I completed the repair in less than five minutes. My blender is as good as new. Thank you PartSelect.

My girlfriend was going to throw out a nice blender and I said I can fix it. She said it will cost too much so I did an internet search and came up with this website. I received the part in short order and fixed the blender in 10 minutes. Got a big thanks that I cant describe here.

I followed the easy directions online - using a screwdriver and hammer, I smacked the base plate of the coupling and it unscrewed easily. I had tried to be gentle first - I didn't want to do damage! I lightly screwed the replacement coupler on and began using the machine... just like it used to be!! Very easy... just follow the online directions!

Replaced drive coupling after dome assembly started to stick and ruined coupling. Took 2 months 2 get dome assembly. It was back ordered. they were very helpful at parts select and offered to return my money several times. im glad i waited.

I ordered a new drive coupling, removed the old coupling and installed the new one.

This repair was only "a bit difficult" because it was hard to get the drive coupling separated from the motor shaft. Once I worked that with a screwdriver and a pair of needle nose pliers, the actual coupling installation was a breeze. I found the video on the website to be very helpful.

This was the first time we used the blender. We bought it a few years ago to replace our old blender and never used it. I think the rubber coupling got hard oveer time. Anyway, I followed the instructions you gave and the repair was quite simple. My wife is elated that the blender was saved. The quick response from you made the experience a great one.

Followed the instructions that came with the part. Pried off the old drive coupling with screw drivers then treaded on the new one. Piece of cake...

Watched video on how to remove the drive coupler. Made the repair simple and easy. Used two screw drivers to pry the damaged coupler up this loosened the coupler and then just removed it. cleaned the threads and screwed the coupler on. surprised me how easy it was.