KGCT366GBL0 KitchenAid Cooktop - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old skirts tabs broke off with age
-
Leanne from Huntingtown, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Burners will not light in the light position
With no inctructions removed the counter top burner tried to figure out how to remove the glass. Next removed the burners (remember to place the burnersin a open area in the exact order you remoned them from the stove)The burners are not the same. Now the glass was acessiable to remove. The switch harness was easy to replace. Removed one switch at a time noting how the harness was routed.Remember the stove is upside down. First remove the rubber dirt sheild and washed each sheild. Note the key way on the gas adjust shaft there is a knotch on the switch that must be located and pressed in to place. Complete the 5 switches noting not to remove the termination of the harnes until the very last step. That connects to the main power. I had to cut a wire tie and replace to complete the process. Removing a burner takes a star bit to unscrew the burner from the stove top.
Parts Used:
-
Wesley from Edgewood, WA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
old drip bowls needed replacement
The repain involved removeing two screws in each of the burners. Easy to fix. Looks like new now for a fraction of the cost of replacement.
Parts Used:
-
scott from carrollton, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!