KGCC506RWW04 KitchenAid Cooktop - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
no spark on surface of gas stove
repair failed; after much difficulty in accessing the small bolts that hold the 'spark igniters' in place; rear two were more accessible, front two proved impossible. Next step, invest in a new slide-in stove. The repair was a dad guess on my part; although designers often consider repair as a non-option, -sad but true.
Parts Used:
-
Charles from Saint Charles, IL
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
While remodeling my kitchen I threw way the caps for my new cooktop.
There wasn't really anything to fix. I just had to put the burner caps on. I will say though that the service that I got and the people I talked to on the phone were wonderful. I got what I requested the first time but it was not the right part. I then called and they let me return the wrong part and the second time the order was not correct. (my fault) They are not only sending me the correct part, but they also credited the shipping. I will definitely will use Part Select again.They were great.
Parts Used:
-
CAROL from BARTONVILLE, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
no spark on stove top (gas)
-
larry from Boulder city, NE
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Old skirts tabs broke off with age
-
Leanne from Huntingtown, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
burners would not lite, no spark
pull out the stove,took the top back panel off, take off wires one at a time on new spark module.. easy
Parts Used:
-
doug from ramsey, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Missing regulator when floor model gas cooktop was purchased
1. Apply gas pipe joint sealer to treaded nipple on bottom of cooktop; 2. Install regulator on nipple with regulator direction arrow pointing to top of cooktop; 3. Tighten but do not overtighten as it may crack the aluminum body regulator; 4. Make sure the face of the regulator with the green painted surface faces the outside of the cabinet; 5. Get a new gas flex hose to connect to gas pipe (got mine at Lowe's - 2 feet long with all the right fittings for about $15). 6. Follow instructions on gas flex hose - make sure you use gas pipe joint sealer only where indicated; 7. Turn gas shutoff valve back on and test for leaks using soapy water; 8. Turn on each cooktop burner to bleed out air.
Parts Used:
-
Jerald from Loveland, OH
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!