Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KDRS807SSS00 > Parts

KDRS807SSS00 KitchenAid Range - Parts

All parts for the KitchenAid Range KDRS807SSS00

Below is a list of all parts for the KitchenAid Range KDRS807SSS00. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KDRS807SSS00
1-14 of 223
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$46.53

Oven Rack

This oven rack is chrome in color and is approximately 24 inches wide by 16 inches deep. If your old oven rack is damaged, you should consider replacing it. Many of our customers h...

$64.85

Grate Insert - Black

Sold individually.

$77.91

Element, Broil

This broil element is found on the roof of the oven.

$66.80

Temperature Sensor

The temperature sensor measures the temperature inside the oven. If your oven is too hot, not heating evenly, is not heating enough when baking, or simply will not start, you could have a faulty temperature sensor. A faulty temperature sensor can be a fire risk. If your sensor is not working properly, you should look to replace it straight away. A failed oven sensor is most often responsible for F3 or F4 error messages on electronically-controlled ovens. Make sure you disconnect the power to your range before you start your repair.

$54.59

Thermostat

This thermostat is also known as a thermal cut-off fuse and is used in conjunction with your range. This part establishes and maintains the internal temperature of the oven cavity....

$4.88

SCREW

Sold individually.

$16.96

Block, Terminal

This is the terminal block for the power cord on an electric range.

$20.30

Light Bulb - 120-130V - 15W

This part is a light bulb that is 120-130 volts and 15 watts, and is used in conjunction with your range or wall oven. The function of this bulb is to illuminate the interior of the oven.Before making this repair, you will need to disconnect your appliance from the electrical source. We recommend wearing work gloves to protect your hands during this installation. No tools will be required for you to make this repair. However, if your old bulb breaks while you are trying to remove it, you will need a pair of pliers to grasp the socket and twist it until it comes out.

$2.92

Screw

Sold individually.

$7.83

Rear Leveling Leg

Sold individually.

$27.92

Door Hinge - Left Side

For Stainless Steel models ONLY.

$48.46

GASKT-DOOR

$4.79

Screw

Sold individually.

$2.96

Screw (2)

This screw is sold individually.

All Parts for the KDRS807SSS00
1-14 of 223