Needed new water filter...red indication light on.
Turned the icemaker off (lifted the wire up inside the freezer). Used a pliers to turn and take the circular cover off..located on the bottom of the refrigerator grill..it was tight. Pulled out old filter, put new one on..thats it! Simple. We had to reset the red light inside the refrigerator..pushed it, heard a beep, pushed again, got the green light.
Twisted filted out from bottom of frig; removed cap and placed on new filter and pushed filter into bottom of frig and twisted clockwise to lock into place. Remove a few qts of water to clear new filter and reset light and was finished.
simple procedure of turning knob at bottom of fridge 1/2 turn to left, removing old filter, inserting new filter and turning knob to right. Used pliers to turn knob. Part replaced by female of the house.
shipping was faster than promised. Installation was as easy as replacing a light bulb. Make sure you turn off the ice maker before removing old filter - this could save you a big mess. Also, make sure you run about a gallon of water through the system before you start using the dispenser.
display inside refrigerator indicated time to change filter
1) Turn off ice maker 2) Remove old filter by making 1/4 counterclockwise turn 3) Insert new filter and tighten 1/4 clockwise turn. 4) Turn ice maker back on 5) Press & hold "reset" button by utilization display to return to 99% - DONE !
I viewed the video online and removed the old filter and installed the new filter in about two minutes total time. The instructions provided in the video made the change out easy.