KBRA20ELWH00 KitchenAid Refrigerator - Parts

Water Fill Cup and Bearing

★★★★★

★★★★★

(10)

This refrigerator ice maker fill cup dispenses the water into the ice cube mold during the fill cycle. Replacing the water fill cup is a possible solution if you notice that the ice maker is leaking, ... Add to cart

Water Tube Kit

★★★★★

★★★★★

(7)

This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may... Add to cart

Touch-Up Paint - White

★★★★★

★★★★★

(1)

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is... Add to cart

Screw

★★★★★

★★★★★

(5)

Sold individually. Add to cart

Evaporator Fan Blade

★★★★★

★★★★★

(4)

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate... Add to cart

Humidity Control Slide

★★★★★

★★★★★

(1)

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper. Add to cart

Ice Mold

★★★★★

★★★★★

(13)

This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake re... Add to cart

Defrost Thermostat Kit

★★★★★

★★★★★

(3)

This part is snapped onto the top portion of the evaporator. The thermostat sends temperature information to the processor. The defrost heater must be replaced when replacing the thermostat. Add to cart

Ice Maker Shut-Off Arm

★★★★★

★★★★★

(2)

The icemaker shut off arm, used in a refrigerator, gives the icemaker a signal to stop making ice once the bin has a reached a certain limit. This helps monitor ice production. If your icemaker is not... Add to cart

Cycling thermostat

★★★★★

★★★★★

(1)

The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine when to release the ic... Add to cart

Water Inlet Valve - 120V 60Hz

★★★★★

★★★★★

(10)

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold. This valve is used on side by side ... Add to cart

Ice Bucket

★★★★★

★★★★★

(4)

The ice bucket in your freezer catches and holds the ice when it is released by the icemaker. If your ice bucket is cracked or damaged, you may need to replace it to prevent a potential leak. This par... Add to cart