Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JGD8430ADS > Instructions

JGD8430ADS Jenn-Air Cooktop - Instructions

All installation instructions for JGD8430ADS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the JGD8430ADS
46-60 of 118
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

cracked knob

  • Customer: Charlie from Willis, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
put new knob on

the gas burner head needed to be rerplaced due to the sparker not functioning properly

  • Customer: John L from FAIR OAKS, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Ordered a replacement, removed the old burner and installed the new one. Works perfectly.

the knobs had broken

  • Customer: john from SPRING HILL, KS
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
parts came on time and the repair was just remove the old and replace with new.

Brocken Burner Knob

  • Customer: Anita from Gloucester, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
This was a simple replacement of a burner knob. The website had exactly what I needed, including a photograph so I was sure it was the exact match. Delivered quickly and was perfect.

my knob broke

  • Customer: Mary from Granite Bay, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 7 people found this instruction helpful
There is really nothing to replace a stove knob. What I was impressed with was the speed in which the knobs came to my house, the very next day from the day I ordered them.
Thanks a ton!

Range would not light.

  • Customer: Robert from Cresco, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 4 people found this instruction helpful
First I removed the burner, two screws held it in place. The ignitor is attached to the burner with one screw remove the screw then remove the one wire connection. Reverse the steps to put back together. The whole job from start to finish takes about five minutes.

Ignitors with VERY weak sparks (2 Burners)

  • Customer: Thomas from Potomac, MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
Should have read the partselect instructions first 1.) unplugged range 2.) unscrewed (torque screws - good thing I had some) burners - one screw was corroded into the top and snapped - will require a drill to remove and replace metal screw. 3) slid electrical wire from contact 4.) unscrewed (with phillips) Burner Electrode assembly (also corroded - took some force) replaced electrode assy and reversed steps. Works perfect.

A plastic handle cracked and was loose.

  • Customer: Donald from Half Moon Bay, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 5 people found this instruction helpful
I lifted off the broken handle and replaced it with a new handle. It worked.

Ignitor cracked and would not light

  • Customer: Mark from Hendersonville, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 2 people found this instruction helpful
Simply removed the old ignitor and install the exact replacement part. Work great.

Ignitor cracked on 3 of my gas top buners

  • Customer: james from neuvo, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 2 people found this instruction helpful
I used a star head driver to take of burners ,then pulled wires out about 2 inches unplugged old ignitors and plugged in new ones

electrode would not spark

  • Customer: Ronald from Sumas, WA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 5 people found this instruction helpful
removed two screws, lifted the element, disconnected wire, removed one screw that holds electrode, replaced anf assembled

original knobs were broken. They are only plastic afterall and no did not hold on the stem to turn on and off without duct tape.

  • Customer: Tamara from Crown Point, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
Simple. I went online, found the replacement part, ordered 5 new knobs. They came within 4 days and I put them on. Easy as can be. I saved this site so I can go back to it if I ever need to. Wonderful! Thank you..

Knobs split, was getting inaccurate flame

  • Customer: Robert from Alta Loma, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 6 people found this instruction helpful
Remove old knob. Replace with new knob.

The ignitor went out on one of the burners of the gas range

  • Customer: Ed from Overland Park, KS
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 3 people found this instruction helpful
Remove the burner cover to reach the burner assembly. From the top of the cooktop you will see 2 screws holing the burner assembly. Using a T drive (6 point screwdriver)remove both screws and the burner assembly will come out of the cook top. Using a phillips head screw driver, remove the old ignitor from the burner assembly. Mine was galled up, so I had to use some penetrating oil and let it sit for a half hour. I then used a hammer and a phillips head screwdriver to tap the screw as I twisted to un-tightened the screw. Once it broke loose, I placed the new ignitor and reassembled the burner into the stove.

Broken electrode

  • Customer: Douglas from La Habra, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 7 people found this instruction helpful
First I tried twitching my nose....after I stopped sneezing I got a screw driver and put the new electrode in and gosh in gahiggy, it worked!!
All Instructions for the JGD8430ADS
46-60 of 118